**Pick Holder**
This is a cool little 3D Printed guitar pick holder. It holds around 3-4 picks. My design used a spring I found inside of an old machine. But the design can be easily changed for any type of spring. It is a cool little design and a fun thing to keep around

**_Surprise_**

This guitar pick design also has a surprise Shrek face on it if you want it! If not you can print out the plane guitar face.

#JuneTunes


Spring Loaded Guitar Pick Holder

Pick Holder v6.step

**Water Fountain/Filter**
This is a really cool outdoor water fountain that doubles as a water filter! While it does possess water filtering capabilities, it truly transcends its function and becomes a captivating fusion of a water and an artistic statue that beautifully incorporates the essence of nature.


_How to use_
In the first section fill with water. The water will automatically flow to the second section. In the second section you will want to put in smaller pebbles and rocks. In the third section you will want to put in charcoal (This is optional. It helps give the water flavor). In the last section put in sand. This will filter out all of the filthy particles in the water such as fish poo, dirt, etc. 

Water will take a while to get to the bottom as it has to go through several small holes, not to mention the sand and charcoal. 

**Print Information**
You can print in any nozzle size from .4mm-.8mm. You can use any layer height from .16-.28mm. 
**NO SUPPORTS** This models is designed to be printed without any support material. 
I would recommend using a brim just to make sure that the legs don't fall over when printing. 

#FunctionalArt

Water Fountain/Filter #FunctionalArt

**Water Fountain/Filter**
This is a really cool outdoor water fountain that doubles as a water filter! It is small and can be taken anywhere, and in emergencies you can filter out all the filthy stuff in water. (Except for bacteria). It is a super fun, cool, and practical design. 

_How to use_
In the first section fill with water. The water will automatically flow to the second section. In the second section you will want to put in smaller pebbles and rocks. In the third section you will want to put in charcoal (This is optional. It helps give the water flavor). In the last section put in sand. This will filter out all of the filthy particles in the water such as fish poo, dirt, etc. **If in a camping situation just be sure to boil the water to kill any harmful bacteria as this filter won't filter out bacteria.** _In case of emergency and you have no access to fire you can drink the filtered water. Symptoms of sickness will appear after about a week. _

Water will take a while to get to the bottom as it has to go through several small holes, not to mention the sand and charcoal. 
**Print Information**
You can print in any nozzle size from .4mm-.8mm. You can use any layer height from .16-.28mm. 
**NO SUPPORTS** This models is designed to be printed without any support material. 
I would recommend using a brim just to make sure that the legs don't fall over when printing. 

#OutdoorThangs
#OutdoorThangs

Asthetic Water Filter.stl

Asthetic Water Filter.step

**Important**
This is a really neat design for a 3d printed carabiner. It works really well, however, it cannot support a huge amount of weight as it is only plastic. 

**Print Information**
Best printed in PETG
.4mm nozzle with .2mm layer height

#OutdoorThangs

3D Printed Carabiner

Caribiner A.step

**Mini First Aid Kit**

_Why do you want this?_
I think we have all had situations where we wish we had some band-aids or alcohol towelettes with us. This small first aid kit is perfect to toss into your cars glovebox in case you ever need it. Maybe you are going on a hike and don't have a fancy expensive first aid kit, toss this into your backpack and you can mend any scratch or cut. 


**Details: **
This awesome first aid kit is small and compact but incredibly useful! It can carry a whole range of different things. My kit holds around 15 band-aids, 6 alcohol towelettes, nail clippers, a small pocket knife, cue-tips, and some cotton pads. And I keep an extra latch inside the case just to be safe. This is an awesome and cool looking first aid kit that is perfect to keep around. 

 


**IMPORTANT!!!** 

I have included some pre-sliced files. They are meant for the Ender 3 V2 however any printer of similar size should work. But MAKE SURE THAT YOU HAVE THE RIGHT SIZE NOZZLE! Some print files use a .8mm nozzle and some use a .4nn nozzle. 



**Features:**

 To make that as easy to print as possible I made the latch a simple snap in place                             latch that securely holds the kit shut but also quick and easy to remove.

                  
The hinge is a very simple hinge. The hinge pin is very easy to install and is very                           secure since it has a threaded nut that holds it securely. 


**DISCLAIMER!!!**

While this kit is fun and useful, it isn't a full first aid kit. It is just a useful kit to have on you, however if you are going to do something dangerous don't just bring this, be sure you have a real First Aid Kit in case an injury is very substantial. 

#OutdoorThangs
#OutdoorThangs


3D Printed First Aid Kit #OutdoorThangs

First Aid Kit v3.step

I am a 16 year old teenager. I was born in Colorado Springs but I have live in Mexico for fourteen years now. I love 3D design, 3D printing, robotics, and programming. I am very good at Fusion360 and am in the process of learning SolidWorks

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Peter Nickerson

Spring Loaded Guitar Pick Holder

Water Fountain/Filter #FunctionalArt

3D Printed Carabiner

3D Printed First Aid Kit #OutdoorThangs