Adapter plate to allow the mounting of the magnetic Panda Touch backplate to a 100x100 VESA mount.

There are two versions - the "standard" version uses hex-head screws (1/4"-20). The M4 version supports the more standard M4 VESA screw size.

Required Materials:

- 4x screws, either hex-head or standard M4 screws. The main body of the adapter is 10 mm thick.
- 4x nuts, if using hex-head screws.
- 4x flat head hex screws, M3x10-12 mm. 8 mm will probably also work.

Printing: print flat; settings don't matter too much. You may want to check that the screw holes are appropriately sized, as the screws just go into plastic.

Assembly:

1. If using hex-head screws, insert.
2. Plug in USB cable.
3. Attach the magnetic back plate using the M3 screws.
4. Install the adapter onto the VESA mount, either by installing nuts or using the M4 screws.


VESA Adapter for BigTreeTech Panda Touch

Panda Touch VESA Adapter.stl

Panda Touch VESA Adapter v4.step

Panda Touch VESA Adapter M4 v3.step

Replacement leg for Tripp-Lite monitor stands models MR1411M and MR1812M. Would probably also work with the triangular MR1220M if you remove the "wings" that go on the outside of the metal lip.

Print on its back. Supports are required for the section with the screw hole. Fits an M6 nut that is roughly 6 mm thick.

I've generated STLs for the lengths stated in the manual, but the F3D file will allow for legs of any length. You will not be able to get too short and legs that are too long may be too weak.

As 3 of my legs were fine, I did not include any provision for adding a rubber foot.

The default STL is 140 mm.

Replacement Leg for Tripp-Lite monitor stand MR1411M

Tripp-Lite Replacement Leg.stl

Tripp-Lite Replacement Leg 150 mm.stl

Tripp-Lite Replacement Leg 100 mm.stl

Tripp-Lite Monitor Stand Replacement Leg v2.step

Tripp-Lite Replacement Leg 110 mm.stl

Tripp-Lite Replacement Leg 130 mm.stl

Tripp-Lite Replacement Leg 120 mm.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

shihchiun

VESA Adapter for BigTreeTech Panda Touch

Replacement Leg for Tripp-Lite monitor stand MR1411M