Turn any old T-shirt into your next halloween costume! Simply press the snap fastener through a freshly made hole into a scale... and repeat.

Start from the top down and place the next row offset a bit to cover the seam from the row above. Scale your scales as desired to use less scales per costume.

I've weaved my own chainmail shirt. A daunting project that turned out to be a very enjoyable process. It took several Netflix series worth of time to finish. These 3D printed scales should simplify the process.

#Hallowearables

Snap Fit Scale mail #Hallowearables

Scale.SLDPRT

These are the STL files for my entry into the #Hallowearable contest. 

Main thang:
https://thangs.com/m/27847

Shoulder Buddy Puppet STL Files

Assembled (DoNotPrint).STL

Always looking out for you, this is the guardian you need on your side. Have an entire conversation with your subconscious through body wiggles and perfectly timed blinks.

Inspired by the shoulder pets often seen at Medieval fairs that can move their heads a bit. My version should crank up the mobility and bring out some personality. The eye moves in its socket before the other vertebrae start to move. 🙄


[BILL OF MATERIALS]

(1) Average rubberband cut in two ~1" segments
(2) <0.5" M2.5 or 4-40 bolts 
(6') Fishing line, Floss or String
Hot glue or other adhesive


[ASSEMBLY] 
Glue a segment of rubber band on the inside of the eyelids near the hinge keeping them closed. 

Glue string on the inside of the eyelids near the center rear. These strings will go into one set of holes in the special eye socket vertebrae.

Feed string through the eyeball holes, you should have 4 lengths, glue or knot in place.

Take the eyeball and press into the special eye socket vertebrae which has extra holes in it. 
Align the eyelid hinge holes with one set of holes in the eye socket and screw in place. Feed the blink control lines through the other set of holes and out the bottom of the vertebrae.  

Assemble the body one vertebrae at a time feeding the control lines through their designated holes and into the base and underarm strap following the guide blocks.

Fit the straps to your arm size, for thicker bodyparts the taught control lines will maintain the grip, the straps don't need to be connected.

With your buddy attached to you pull out the slack and knot to keep the puppet straight and taut. Allow the eyes to be closed. 

Your buddy should be pointing straight at the sky, eye closed and firmly attached to you. Several loose strings dangling from beautiful knots underneath your arm. 
Feed one of those dangling control line's slack through a nugget to give yourself something to grip.


You should have 3 nuggets in center position; Left/Right, Up/Down, and Blink.

With your arms crossed, moving the nuggets in either direction will animate your buddy. pulling the blink control line will cause the eyelids to open completely.

 
#HalloWearables
STL Files: https://thangs.com/m/28149

Shoulder Buddy Puppet #Hallowearables

Always looking out for you, this is the guardian you need on your side. Have an entire conversation with your subconscious through body wiggles and perfectly timed blinks.

Inspired by the shoulder pets often seen at Medieval fairs that can move their heads a bit. My version should crank up the mobility and bring out some personality. The eye moves in its socket before the other vertebrae start to move.

To assemble:
Glue a segment of rubber band on the inside of the eyelids near the hinge keeping them closed. 

Glue string on the inside of the eyelids near the center rear. These strings will go into one set of holes in the special eye socket vertebrae.

Feed string through the eyeball holes, you should have 4 lengths, glue or knot in place.

Assemble the body one vertebrae at a time feeding the control lines through their designated holes and into the base and underarm strap.

Fit the straps to your arm size and feed the mating control lines through a control nugget. Pull out the slack and knot to keep the puppet taut. 

You should have 3 nuggets; Left/Right, Up/Down, and Blink.

#HalloWearables

Underarm Strap-1

Strap Base-1

Body Segment-5

Eye Socket-1

Eyeball-1

Eyelid-2

Control nugget-3

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

roboticlay

Snap Fit Scale mail #Hallowearables

Shoulder Buddy Puppet STL Files

Shoulder Buddy Puppet #Hallowearables