I designed this to hold a pair or earplugs, but it could fit a variety of small things.

It is print in place and features a small tab for positive closure. I think I got the snap working perfectly. The hinge has a 0.25mm clearance which worked perfect on my P1S. I printed mine in PLA silk at 0.16mm layer height.

My round case was quite popular so I decided to make a square one for some variety.

Earplug Case, Small Clamshell Square

Small Clamshell Square.STL

Wind too strong? Snap a pole or two on your pop-up canopy? If you want to try repairing it give this bracket a try. It is designed for a square pole dimension of ~10.15 x 22.5. PM me if you have a different pole dimensions, and I'll upload another version

Part is intended to be printed with 5 or 6 walls at 0.4mm. I would recommend PLA+ as you want something stiff to attach to the metal poles. 

What you'll need:
Epoxy, I used JB Weld. 
A socket set to tighten the bolt on the bracket side.
A second wrench, any style, for the other side.

Instructions for installation:
1. Print
2. Remove Bolt and set aside.  
3. Apply epoxy to the inside of the bracket. 
4. Attach to the pole with zip ties. Bracket should sit on the outside of the joint. 
5. Adjust the canopy to minimize the gap in the snapped ends. 
6. Let the epoxy cure.
7. Reattach bolt. 
8. Fixed!

Easy Up Repair Bracket, 22.5 x 10.15 pole

Easy Up Repair Bracket.STL

This lid is designed to fit on top of a pill bottle to hold half pills.

Pill Bottle Storage Lid, Walmart

Walmart Pill Bottle storage lid.STL

I designed this to make use of all the silicone tips that are not my size that come with my earplugs and give them away at shows. I suspect they are not as good as the real thing but better than foam ones. 

Features a hollow interior to help carry the treble through. Pairs well with my print in place clamshell. 

I printed mine at 0.08mm and they look great. 

Earplug Inserts for Silicone tips

Loop Ear plug inserts-0.2.STL

I designed this to hold a pair or earplugs, but it could fit a variety of small things. 

It is print in place and features a small tab for positive closure. I think I got the snap working perfectly. The hinge has a 0.25mm clearance which worked perfect on my P1S

Earplug Case, Small Clamshell

Small Clamshell2.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nickolas.clinton1

Earplug Case, Small Clamshell Square

Easy Up Repair Bracket, 22.5 x 10.15 pole

Pill Bottle Storage Lid, Walmart

Earplug Inserts for Silicone tips

Earplug Case, Small Clamshell