These are pegs to allow hanging items using keyholes hangers.

They screw in small threads such as the peg holes in the multiboard.
Just align them with the keyholes by screwing or unscrewing them, you should be able to match all the sizes.

Using the same principle as the T-Bolts, they print flat without support so they are very sturdy.  I print them with 100% infill.

They come in multiple sizes:
- 3mm diameter & 3mm length shaft / 7mm diameter button
- 3mm diameter & 6mm length shaft / 7mm diameter button

I can generate more sizes (just ask), but these where the sizes I needed to hang a phone and a switch on my multiboard.

Multiboard Keyhole Hangers Pegs

Multiboard Keyhole Peg r3 x l6 x b7.stl

This is the spool that goes with the [Spool Holder](https://thangs.com/designer/mmasson/3d-model/Mulitboard%20-%20Wire%20Spool%20Holder-1058182).

I didn't like having the edge of the spool glued or friction fitted in the original [model](https://www.thingiverse.com/thing:4610854/files).  I redesigned the spool with threads now you just screw the parts together and it stays firmly in place.

The tolerances have been adjusted and the spool/pins should fit together without too much pain.

You can use a coin or a screwdriver for the pins, but be careful it's still small plastic parts and can break.

Threaded spool for Wire Spool Holder

Spool_Pin.stl

Spool_Negative.stl

Spool_Positive.stl

This is a multiboard version of the modular wire spool holder.  It is inspired by this [model](https://www.thingiverse.com/thing:6436167).

It snaps in the multiboard using Push-Fits.  You need to have a Multiboard Snap to attach it to the board: https://www.multiboard.io/parts-library/snaps

It needs supports for the push-fit in the back only.  There is a builtin support that needs to be cut with an exacto knife in the front wire slot.

It is compatible with the original spools from the original model, but you can also use my redesigned threaded spools to go with it.  It is a redesign to remove the need for screws or glue.

https://thangs.com/designer/mmasson/3d-model/Threaded%20spool%20for%20Wire%20Spool%20Holder-1058186

Mulitboard - Wire Spool Holder

Mulitboard - Wire Spool Holder.stl

Multiboard Keyhole Peg r3 x l3 x b7.stl

IT Professional.  Thinkerer by nature...

Thingiverse: https://www.thingiverse.com/mmasson/designs

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mmasson

Pinned models

Mulitboard - Wire Spool Holder

Multiboard Keyhole Hangers Pegs

Multiboard Keyhole Hangers Pegs

Threaded spool for Wire Spool Holder

Mulitboard - Wire Spool Holder