This is inspired by Zack Freedman's weighted Gridfinity baseplates, but puts the weight cavity on TOP so that the model needs NO SUPPORTS to print. As with all my other Gridfinity models, this was designed using CadQuery instead of Fusion 360. See this video for further information about the project:

https://www.youtube.com/watch?v=ra_9zU-mnl8

This version is customizable in CadQuery so you can generate custom sized weighted gridfinity baseplates, including ridiculously large ones like 10x10 baseplates etc. I have included a random selection of grid sizes from 1x1 up. These should be fully compatible with the official boxes/grids. You can also fully customize the X and Y unit sizes AND the presence of weight slots AND/OR magnet/bolt holes! (in the filenames: nowt = no weight slots, and nohole = no magnet/bolt holes in the baseplates).

I re-implemented this because it seems like a perfect fit for an open source CAD software like CadQuery. With that in mind I have also released the source code python script that was used to generate the STLs. I would love for others to help me create new organizer bins and/or re-implement organizer bins in open source CAD software like CadQuery or OpenSCAD.

I used CadQuery/CQ-Editor to design this with a recent version checked out from github on April 13th, 2022. Unfortunately CadHub.xyz does not have a recent enough version of CadQuery to render this properly (n.b. the issue is with lack of a combine argument in the older version of the eachpoint method).

CQ-Editor is available from here, but please check out a 0.30dev version or newer to be able to compile the included CadQuery source code:
https://github.com/CadQuery/CQ-editor

If you are interested also check out all of my gridfinity models for baseplates and boxes here: 
https://www.printables.com/social/107343-jdegs/collections/154274

Because Thangs does not allow me to upload the CadQuery python source code for this model, it is available here:
https://www.printables.com/model/186703

Support-less Weighted Gridfinity Baseplates (CadQuery Customizable)

inverted weighted grid 1x3.stl

inverted weighted grid 1x2.stl

inverted weighted grid 1x4.stl

inverted weighted grid 1x5.stl

inverted weighted grid 2x2.stl

inverted weighted grid 1x6.stl

inverted weighted grid 1x7.stl

inverted weighted grid 3x3.stl

inverted weighted grid 4x4.stl

inverted weighted grid 5x5.stl

inverted weighted grid 6x6.stl

inverted weighted grid 7x7.stl

This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project:

https://www.youtube.com/watch?v=ra_9zU-mnl8

This version is customizable in CadQuery so you can generate custom sized divided boxes, including ridiculously large ones like 10x10 boxes etc. I have included a random selection of grid sizes from 1x1x2-high up. These should be fully compatible with the official boxes/grids. You can also fully customize the X Y and Z unit sizes AND the number of dividers on X and Y separately!

I re-implemented this because it seems like a perfect fit for an open source CAD software like CadQuery. With that in mind I have also released the source code python script that was used to generate the STLs. I would love for others to help me create new organizer bins and/or re-implement organizer bins in open source CAD software like CadQuery or OpenSCAD.

I used CadQuery/CQ-Editor to design this with a recent version checked out from github on April 13th, 2022. Unfortunately CadHub.xyz does not have a recent enough version of CadQuery to render this properly (n.b. the issue is with lack of a combine argument in the older version of the eachpoint method).

CQ-Editor is available from here, but please check out a 0.30dev version or newer to be able to compile the included CadQuery source code:
https://github.com/CadQuery/CQ-editor

f you are interested also check out all of my gridfinity models for baseplates and boxes here:
https://www.printables.com/social/107343-jdegs/collections/154274

And my related model for undivided gridfinity boxes here:
https://www.printables.com/model/174715-basic-undivided-gridfinity-boxes-cadquery-customiz

Source Code is available here since Thangs doesn't allow CadQuery python files:
https://www.printables.com/model/179040-divided-gridfinity-boxes-cadquery-customizable

REVISION HISTORY:

220427: Revision #1
- Fixed issue where the bottom thickness of the box was only 1.0mm above the top of the magnet/bolt holes, but was intended to be 2.0mm. Re-rendered all models and released revised python source code.

Divided Gridfinity Boxes (CadQuery Customizable)

divided box 1x4x3-hi and 1x3-divs.stl

See my other gridfinity models here on printables:
https://www.printables.com/social/107343-jdegs/collections/154274

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow