<p dir="ltr"><span style="white-space: pre-wrap;">To thank all of you for the positive responses I have received since I have started publishing models, I wanted to release something special this week. Instead of one model or a model with a few different versions, I wanted to release 12 models in one! Please check out my latest upload to see what I have been working on and to download some fun 2D wall art pieces! There are STLs and 3MF files for each of the models. I hope you enjoy them and thanks again! :)</span></p>

 To thank all of you for the positive responses I have received since I have started publishing models, I wanted to release something special this week. Instead of one model or a model with a few different versions, I wanted to release 12 models in one! Please check out my latest upload to see what 

2D Wall Art Collection Now Available (12 Models!)

I based this model off of the filaments below, but I actually used some generic black, light grey, and white filament and I think it looks great. Should be able to adjust the X/Y size, but make sure the Z height stays where it is or the model won't work.

If you've never made a Hueforge print before, it may look complex, but it's pretty easy. Just make sure your filament is dry, clean your bed well, level your bed, and apply glue stick if needed. No AMS/MMU is needed; just add pauses at the layers below and switch the filament when your printer stops.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:
	PLA Sunlu Meta Black Transmission Distance: 1
	PLA Sunlu Meta Grey Transmission Distance: 3.5
	PLA Sunlu Meta White Transmission Distance: 8

Swap Instructions:
	Start with Black
	At layer #3 (0.36mm) swap to Grey
	At layer #8 (0.76mm) swap to White for the rest.


I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Stone Demon 1 - Hueforge

Stone_Demon4_Front_100x100.stl

Stone_Demon4_Front_100x100.3mf

I based this model off of the filaments below, but I actually used some generic black, generic orange, Eryone Burnt Titanium, and generic white filament and I think it looks great. Should be able to adjust the X/Y size, but make sure the Z height stays where it is or the model won't work.

If you've never made a Hueforge print before, it may look complex, but it's pretty easy. Just make sure your filament is dry, clean your bed well, level your bed, and apply glue stick if needed. No AMS/MMU is needed; just add pauses at the layers below and switch the filament when your printer stops.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
	PLA Sunlu Meta Black Transmission Distance: 1
	PLA Protopasta Out of Darts Orange Transmission Distance: 11
	PLA Protopasta Good as Gold Transmission Distance: 5
	PLA Sunlu Matte White Transmission Distance: 5

Swap Instructions:
	Start with Black
	At layer #14 (0.68mm) swap to Out of Darts Orange
	At layer #20 (0.92mm) swap to Good as Gold
	At layer #26 (1.16mm) swap to White for the rest.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Bones Suit - Hueforge

Bones Suit_Front_200x200.3mf

Bones Suit_Front_200x200.stl

This model is designed to print with a .4mm nozzle, .20 layer height, 1-2 walls, with "Detect Thin Lines" on. A brim may be needed if your printer's adhesion isn't totally dialed in. You should be able to size up this model without any issue, but you may not be able to size down much without a .2mm nozzle, as it may cause issues.

I included an STL and 3MF file for this model.

If you print this model, please upload pictures! :)

Low Poly Volcano

Low Poly Volcano.stl

Low Poly Volcano.3mf

Low Poly Butterfly

Low Poly Butterfly.stl

Low Poly Butterfly.3mf

I started 3D printing at the beginning of 2023 and now I'm ready to share my own models. Please let me know what you think!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jasaa3d

Designer posts

2D Wall Art Collection Now Available (12 Models!)