tracking pixel
Mimetics 3

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

by

Mimetics3D

Follow
Follow
Remix Model
Like
Mimetics3D
Mimetics3D
Image 1 of 10
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
2D
3D
Makes
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) - little bony boi - 3d model
Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints) 3d model
This model is restricted by licensing terms. 
669 Likes3.9K DownloadsSeptember 22, 2023
This model is restricted by licensing terms. 


Print-In-Place, No Supports, Articulating Fidget Toy

Subscribe To the Mimetics 3D Commercial Tier on Thangs. for rights to sell prints of your cool new friend.

Find the Bony Basilisk's magical little feline friend over here: https://than.gs/m/940296

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests. This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

Snap-Flex Collection: This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows it to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience.

Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snap-Flex Instructions: To Lock: Push Body Segments together To Unlock: Pull Body Segments Apart

Tolerance: To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Medium tolerance model. For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Long Bony Basilisk: https://than.gs/m/936921 Loose Tolerance Long Bony Basilisk: https://than.gs/m/937052

Please try out each to see what works best for you, and let me know which version you prefer!

Other Models:

If you like this Bony Basilisk, be sure to check out the latest articulated model here: Tight Tolerance Cold Snap: https://than.gs/m/960229 Medium Tolerance Cold Snap: https://than.gs/m/960234 Loose Tolerance Cold Snap: https://than.gs/m/960235

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings: 0.2mm Layer Height 3 Wall Loops 3 Top Shell Layers Brim Suggested

Suggested Material: PLA or PLA+ Note: Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint. Use silks at your own risk

No Supports, Print-In-Place at 100% scale Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND harder to pop, so be sure to do a shorter test print to make sure it's not TOO hard to snap into place.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


669 Likes3.9K DownloadsSeptember 22, 2023




This model is restricted by licensing terms. 
669 Likes3.9K DownloadsSeptember 22, 2023
This model is restricted by licensing terms.