Holder for Altoids™ tins using [Multiconnect connectors](https://www.printables.com/model/716558-multiconnect-general-connector-for-your-board). 

Original holds 2 tins, flat against the board.

Added a set of sideways versions, holds from 2 to 6 tins. Can make more sizes if needed, message me. 

Prints with standard Multiboard settings, with supports. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)

Altoids™ Tin Holder for Mutiboard

Altoids Holder.stl

Altoids Holder x2 Sideways .stl

Altoids Holder x3 Sideways .stl

Altoids Holder x4 Sideways .stl

Altoids Holder x5 Sideways .stl

Altoids Holder x6 Sideways .stl

Multiboard holder for standard Noga­™ tool holder. Dovetail on the back for [MultiConnect connectors](https://www.printables.com/model/716558-multiconnect-general-connector-for-your-board).

Prints with standard Multiboard settings. Will need supports for the ring. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)
 

Deburr Tool Holder for Multiboard

Deburr Tool Holder.stl

Hang your headphones, magnifier headsets, etc. from your Multiboard. 

Intended to be attached with a standard “big” bolt. If you use the multihead version, you can attach this without completely using up that position on the board.

Prints with the flat side with the hole on the bed. Prints well with the standard Multiboard settings. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)

Headphone Holder for Multiboard

Headphone Holder.stl

Multiboard/multiconnect clip to match the mounting spot on my Klein multimeter. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)

Klein multimeter Multiboard mount

Klein meter holder.stl

Mount a Multiboard tile to a 2020 extrusion using Multiconnect connectors (https://www.printables.com/model/716558-multiconnect-general-connector-for-your-board). Files included for 45° and 90° mounting. Prints in the default orientation without supports. Mirror the part in your slicer if you want the tile to point the other direction. Holes are for M4 socket head screws. 

To assemble, put 2 multiconnect connectors into an edge of the back side of your tile. Slide the dovetail onto the connectors so that the weight of the tile rests on the connectors. 

If you like this, you can [buy me a coffee](https://ko-fi.com/lindahlengineering)

2020 Multiboard Mounts

2020 Mount 45.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

LindahlEngineering

Altoids™ Tin Holder for Mutiboard

Deburr Tool Holder for Multiboard

Headphone Holder for Multiboard

Klein multimeter Multiboard mount

2020 Multiboard Mounts