4x3x0·5 - Universal Multigrid Bin Extension

A Universal Bin Extension can be used to extend the height of Multigrid Bins just like Simple Bin Extensions (they just won’t click into place as strongly).

However, Universal Bin Extensions have gaps on the bottom rim that allow you to click it on to more than one Multigrid Bin.

This Bin Extension is 3x4 cells and 0.5 units high (148 mm long, 198 mm wide and 30 mm high). Stacking a 0.5 units high Extension on a Bin will increase its height by 25 mm.

The internal distance between walls is 144x194 mm (although the bottom click rim will make it 138x188 mm). With a Bin Bottom placed inside, the total internal height is 24 mm (19.8 mm up to the inner top rim).

Bins Extensions have holes on the bottom corners called “Rim Lock Holes”, they allow you to tightly secure the Bin Extension into place using Rim Lock Pegs.

You can place Bin Bottoms inside of the Bin Extensions to give them a base.

This part comes with four tolerances: loose (0.2 mm), standard (0 mm), tight (-0.2) and permanent (-0.3 mm). If you use the “standard” tolerance for the Simple Bin Extensions, then the “tight” tolerance will work best for the Univeral Bin Extensions.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io