tracking pixel
Joey G

GEN2 Decor - Faceplates - Essential Series

by
Jerrari
Follow
Follow
Remix Model
Jerrari
Jerrari
|
Image 1 of 4
GEN2 Decor - Faceplates - Essential Series 3d model
Jerrari
Jerrari
|
Image 1 of 4
GEN2 Decor - Faceplates - Essential Series 3d model
2D
3D
Makes
GEN2 Decor - Faceplates - Essential Series 3d model
GEN2 Decor - Faceplates - Essential Series 3d model
GEN2 Decor - Faceplates - Essential Series 3d model
GEN2 Decor - Faceplates - Essential Series 3d model
This model is restricted by licensing terms. 

For Instructions Download the:

GEN2 Interactive Catalog Download


The Essential Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies HERE, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with an M3 screw and nut.

The key feature of Essential series offers is the ability to customize the faceplate easily in a number of way. With a flat surface you can print with different textured beds for pleasing appearance or add logos, designs, or text within your slicer.

Faceplates are available in two variations, a single center hole for knobs or a two holes for handles. Oh right! let's look at available handles so you can see what's available.

Update 10/3/2024: V1.1 - Slightly larger to cover top and bottom gaps in drawer cases

What You'll Need

BASE DRAWER MODELS • GEN2 Decor Drawers - Standard - DOWNLOAD

HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD

HARDWARE Includes affiliated links to help support my projects • Filament - Poplar Wood Filament (this is what I used in many of my photos) ps. use hardened nozzle for abrasive filaments. • M3 nuts and screws: M3x6 - M3x10- I prefer this kit

INSTRUCTIONS • Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.


21 Likes70 DownloadsAugust 10, 2024


21 Likes70 DownloadsAugust 10, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

Layer height0.2 mm
Infill density10 %
SupportsNone