These mounts are designed to securely fasten your RTL-SDR device and cables using 20/20 extrusions. Each mount features integrated zip tie channels, allowing you to easily secure your antenna or USB cables. These mounts offer additional support to the SMA and USB connections on the RTL-SDR device, particularly beneficial when using higher quality cables. Lastly, a dedicated mount is included for using #8 wood screws to attach the assembly to any surface.

RTL-SDR 20/20 MOUNTS

Example.stl

Choose from 120 degrees horizontal, 180 degrees horizontal, or 180 degrees vertical alignment to optimize your signal reception. Each adapter features a counter-sunk hole for a 1/4"-20 thread, 1/2" long flat head screw. The dipole antennas are fastened using 2.5mm wide zip ties, and the adapters themselves are secured using 4.5mm wide zip ties.

2in Pole Adapter for the RTL-SDR Diapole Antenna

180d_Vertical_2in_Pole.stl

1.5in Pole Adapter for the RTL-SDR Diapole Antenna

180d_Vertical_1.5_Pole.stl

1in Pole Adapter for the RTL-SDR Diapole Antenna

180d_Horizontal_1in_Pole.stl

A 3D printable frame, stand, and case for the Raspberry Pi 4 and Raspbian 7-inch touchscreen. Available in portrait or landscape styles, this versatile solution allows you to slide the touchscreen out of the stand and use it like a tablet. The Pi case features ventilation grills, access to all IO ports and proper clearance around the GPIO ports for jumper wire use.

Project Includes:
6 STL Files
x1 Assembly Instructions
x1 3d Printing Guide

Links to required hardware can be found here:
https://www.innovativeaxis.com/rpi4-touchscreen-stand-rh

Raspberry Pi 4 7in Touchscreen Stand

A 3D printable frame, stand, and case for the Raspberry Pi 3 and Raspbian 7-inch touchscreen. Available in portrait or landscape styles, this versatile solution allows you to slide the touchscreen out of the stand and use it like a tablet. The Pi case features ventilation grills, access to all IO ports and proper clearance around the GPIO ports for jumper wire use.

Project Includes:
6 STL Files
x1 Assembly Instructions
x1 3d Printing Guide

Links to required hardware can be found here:
https://www.innovativeaxis.com/rpi3-touchscreen-stand-rh 

Raspberry Pi 3 7in Touchscreen Stand 

This 3D printable irrigation ring comes in three sizes to accommodate various irrigation hose diameters (1/8in, 1/4in, and 1/2in). The design features recessed barbed fittings, with 6 spouts around the exterior and 6 on the interior, as well as a ground spike to ensure stability. The irrigation ring is designed to print support-free, allowing you to conveniently print multiple units without wasting any material.

Project Includes:
-1 STL File
-3d Printing Guide


Irrigation Ring

Part_A_1_8.stl

This PVC and 3D-printed plant trellis optimizes space by combining vertical and horizontal growing, reducing required square footage. The included instructions help you build a compact 3ft version for a 2ft x 2ft x 4ft grow tent. Scaling up is easy without altering the 3D-printed parts. The optional wood floor with a hole cap elevates your plant tray for airflow and drainage. Mason string attachments are tool-free for quick disassembly and easy harvest cleanup.

Project Includes:
-9 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/plant-trellis-rh

Plant Trellis

Take your Raspberry Pi Zero W and BME280 sensor to new heights with this cutting-edge 3D printable case! This pagoda-style design is engineered for optimal airflow around the sensor, while providing maximum protection against precipitation. Its sleek and modern roof design is highly customizable, making it easy to add more sensors to your weather station as needed.

Required Hardware:
https://www.innovativeaxis.com/rpi0w-weather-station-rh

Raspberry Pi Zero Weather Station

This 4-inch ducting adapter allows you to use inline fans, carbon filters, and HEPA filters with your 3D printer enclosures. The adapter is designed to mount onto panels that are 1/8-inch (3mm) thick, which can be easily adjusted by using longer screws. Additionally, the adapter provides the flexibility to remove the ducting and cap off the hole when venting toxic fumes is not required.

Project Includes:
-5 STL files
-Assembly Instructions (pdf)
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/ducting-adapter-rh

Enclosure Ducting Adapter

Transform your 3D printing experience with the Metal Frame 3D Printer Enclosure! This design is optimized for effortless printing and assembly at home, utilizing 20/20 Aluminum Extrusions and a powerful 120mm PC fan / Carbon Filter mount for superior ventilation. Protect your 3D printer from dust and other environmental factors with this advanced 3D printer enclosure.

Interior Dimensions: 24.8 x 24.8 x 24.4 in. (630 x 630 x 620 mm.)

Project Includes:
-27 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/enclosure-mf-rh

3d Printer Enclosure - Metal Frame

This 3D printer enclosure is specifically designed for home printing and assembly. The design prioritizes the use of standard 2"x4" studs, providing ample space for up to two printers. An adapter is also included to stack multiple enclosures, making it an efficient solution for maximizing your printing capabilities.

Interior dimensions: 48in x 24in x 25.5in.


Project Includes:
-17 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/enclosure-xl-rh

3d Printer Enclosure - Wood Frame - XL

This 3D printer enclosure is specifically designed for home printing and assembly. Using high tolerance 1"x 1" wooden dowels, the resulting design not only delivers a sturdy and dependable enclosure for your 3D printer but also provides a cost-effective solution for DIY enthusiasts.

​Interior Dimensions: 25.2 x 25.2 x 24.4 in. (640 x 640 x 620 mm.)

*Example
(https://www.lowes.com/pd/Madison-Mill-Square-Wood-Poplar-Dowel-Actual-36-in-L-x-1-in-dia/3041531) 

Project Includes
-25 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/enclosure-wf-rh

*External PSU mount for i3 MK3 printers

3d Printer Enclosure - Wood Frame

This filament spool enclosure is specifically designed for easy printing and assembly at home, giving you the freedom to create unlimited enclosures in any material or color that suits your needs. With this design, you can easily safeguard your filaments from dust and moisture, ensuring consistent printing quality for your 3D prints.

Project Includes:
-4 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/filament-enclosure-rh

Filament Enclosure | Dry Box

Shield your Raspberry Pi 4 and Raspberry Pi HQ camera sensor from the elements with this cutting-edge 3D printable weatherproof case! This design provides the ultimate protection for your valuable components, ensuring they remain safe and functional in even the harshest environments. With its rugged construction and easy-to-print design, our weatherproof case is the perfect solution for outdoor enthusiasts, professionals, and hobbyists alike.

Project Includes:
-6 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/rpi4-wp-hq-camera-case-rh

Weatherproof Raspberry Pi 4 HQ Camera Case

This project features a robust and protective tablet engineered with 20/20 aluminum extrusions to ensure a universal multi-mounting solution. The tablet has easy access to the Raspberry Pi IO ports and SD card and integrates mounts for the Raspberry Pi 7” touchscreen, Raspberry Pi 4, and Raspberry Pi HQ Camera. The tablet also includes a 40mm fan mount with an optional MT3608 module mounting location, granting users the choice to utilize 5v or 12v fans to achieve optimal cooling, and a threaded cap to safeguard the HQ Camera from the damage of dust and debris. With this project, you can unleash your creativity and transform your Raspberry Pi 4 into a supercharged tablet.

Project Includes:
9 STL Files
x1 Assembly Instructions
x1 3d Printing Guide

Links to required hardware can be found here:
https://www.innovativeaxis.com/rpi4-multi-mount-tablet-rh 

 Raspberry Pi 4 Multi Mount 7in Touchscreen Tablet

This outlet cover combines the functionality of an outlet box with the practicality of a small shelf. The Outlet Shelf features a sliding removable door for easy access to electrical connections while maintaining an organized and visually appealing environment. The outlet shelf utilizes x1 M3 screw and nut to securely lock the door in place. 

Outlet Shelf

A 3d printable case for the raspberry pi 4, the raspberry pi HQ camera sensor and the pi foundation 7in touchscreen.

The 3d printed hinge allows the touchscreen to move 180° with a locking screw to hold it at your preferred angle. To keep everything cool the case has 2 sets of ventilation holes as well as a mounting location for a 40mm fan.
Project Includes:
-8 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/rpi4-hq-camera-case-rh

Raspberry Pi 4 HQ Camera Case

Take your Raspberry Pi 3 and Pi Foundation 7-inch touchscreen to the next level with our cutting-edge 3D printable case! This sleek, wall-mountable enclosure is the perfect solution for those seeking a space-saving and aesthetically pleasing design.

Project Includes:
-2 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Raspberry Pi 3 Touchscreen Wall Mount

Complete.stl

This design employs 3D printing technology to create a robust enclosure in the shape of a cube that houses a 4-inch net pot. To enhance the net pot's stability, the cube's ceiling is vaulted, providing additional support to its walls. Additionally, the top part of the cube features irrigation tunnels that enable water to flow seamlessly and efficiently through the system.

Project Includes:
3 STL Files
1 PDF Printing Guide

Required Hardware List:
https://www.innovativeaxis.com/hydroponic-system-rh

Hydroponic System

LR.stl

Transform your computer experience with this open-frame 3D printable computer! This design features modular parts that seamlessly accept an array of computer components, allowing you to print unlimited personal computer stations, test benches, and hot-swappable workstations. This open-frame computer also boasts a dual 120mm radiator mount, 7" Raspberry Pi touchscreen mount, Raspberry Pi 3 & 4 mounts, SSD, PSU mounts and much more. Elevate your computer setup to new heights with our advanced 3D printable open-frame computer!

Project Includes:
-16 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

Required Hardware List:
https://www.innovativeaxis.com/open-frame-computer-rh

Open-Frame Computer

This 3d printable charging station is designed to house the apple magsafe charger as well as version 1 and 2 of the apple watch. Choose from 3 different positions to display your devices or completely fold it up for maximum portability. 

Required hardware: 
(x2) M3x40 Socket Head Screws
(x2) M3 Nuts

Included in your purchase:
-4 STL files
-Assembly Instructions (pdf) 
-3d Printing Guide (pdf)

iPhone Apple Watch Charging Stand

This controller is designed to mount two Joy-Con controllers and is shaped similarly to an Xbox controller, providing gamers with a familiar and comfortable gaming experience on their Nintendo Switch.

JoyCon Controller Grip

The design of this controller uses a shape similar to the Xbox controller for that familiar comfort while using your Nintendo Switch Joy-Cons.

Required Hardware: https://www.innovativeaxis.com/joycon-controller-rh

This design utilizes an aerodynamic chamber and heat sink to dissipate the increased thermal load caused by using a phone or tablet in desktop mode, improving the device's overall performance by preventing overheating.

Required Hardware: https://www.innovativeaxis.com/smartphone-cooling-rh

Smartphone Cooler

Smartphone_Cooler.stl

The mount is designed to hold a single 140mm PC fan, which is powered through a micro USB connection utilizing an MT3608 voltage step module. Its three-piece design makes it a breeze to print on almost any size printer, and no supports are required, further simplifying the printing process.

Required Hardware: https://www.innovativeaxis.com/140mm-fan-mount-rh

140mm Fan Mount

140mm_Fan_Mount.stl

This advanced meter utilizes an Arduino platform, in combination with a capacitive sensor and a high-resolution 2" OLED screen, to provide precise moisture readings of virtually any growing medium, facilitating more accurate and informed cultivation practices.

Required Hardware: https://www.innovativeaxis.com/moisture-meter-rh

Moisture Meter

Moisture_Meter.stl

Adapter ID is 30mm.
Design Hardware:
M3 x 0.5mm x 20mm socket head screw
M3 x 0.5mm Nut

Hotshoe Flashlight Adapter

Hotshoe_Flashlight_Adapter.stl

These parts have been specifically engineered to accommodate wooden rods that have a diameter of 1 3/8". The central part serves to enhance stability for longer rods.
The hardware utilized in this setup is a #8, 1" flat-headed wood screw.

Wood Rod Wall Mount

Wood_Rod_Wall_Mount.stl

This design facilitates secure wall-mounting of either HEPA (intake) or Carbon (exhaust) filters, providing flexibility for users seeking effective air filtration.

Filter Wall Mount

Filter_Wall_Mount.stl

These ducting accessories provide complete control over airflow in your indoor grow tent. The air diffusers convert vertical airflow to horizontal and evenly diffuse air, while the exhaust easily mounts to bars up to 2 inches in diameter zip ties. To use with larger ducting, simply scale up the design.

Ducting Accessories

Ducting_Accessories.stl

This design provides an efficient solution for cable organization and storage. By inserting one hand into the inner ring to stabilize the apparatus, users can securely attach their cables and proceed to rotate the outer ring, effortlessly winding up the cable.

Cable Storage

This design allows you to wind up your cables for organization and storage. Insert one hand into the inside ring to hold it in place. Attach your cable and rotate the outer ring to wind up the cable.

These plant trays can fit nursery pots up to 5.5" and can be adjusted to various sizes. The raised ridges ensure even runoff during watering, promoting healthy plant growth for indoor or outdoor gardening.

Plant Trays

This dryer on/off knob boasts a distinctive low poly dog head design, with a mounting point attachment specifically tailored to fit GE dryers.

Dog Head Dryer Knob

Dryer on/off knob featuring a low poly dog head. Knob attachment is based off GE dryers.

These modular floor registers offer a versatile range of options, with three distinctive styles that feature angled vents, shoe drying capabilities, and block off caps. The shoe drying model is designed with a dual diffuser system, comprising of a large and small air diffuser, to accommodate various shoe sizes.

Modular Floor Registers

Modular_Floor_Registers.stl

Designs and solutions utilizing additive manufacturing. Featuring multi-STL projects complete with comprehensive printing guides and assembly instructions.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

InnovativeAxis