tracking pixel
DaveMakesStuff

Wrinkled Potion Bottles for Resin Printing

by
DaveMakesStuff
Follow
Follow
Remix Model
Like
DaveMakesStuff
DaveMakesStuff
Image 1 of 4
Wrinkled Potion Bottles for Resin Printing 3d model
2D
3D
Makes
Wrinkled Potion Bottles for Resin Printing 3d model
Wrinkled Potion Bottles for Resin Printing 3d model
Wrinkled Potion Bottles for Resin Printing 3d model
Wrinkled Potion Bottles for Resin Printing 3d model
This model is restricted by licensing terms. 
179 Likes228 DownloadsFebruary 16, 2024
This model is restricted by licensing terms. 


These potion bottles are designed for resin printing. Download includes five potion bottles with unique wrinkle patterns and two styles of interchangeable stoppers.

See here for video: https://youtu.be/wYkzZWZ9lLQ

Print the bottles directly on the build plate as oriented. There are two holes at the bottom of each bottle. These are to eliminate suction forces that may damage your FEP or reduce print quality. One printed, paint over the holes with resin and use a UV wand to cure and make the model watertight.

To print the stoppers, import as oriented with the bottom open end of the stopper on the build plate. Raise the model 5-6mm above the build plate and generate supports up to the rim.

Looking for potion bottles for FDM printing? Try these: Lattice Patterns: https://than.gs/m/998542 Wrinkled: https://than.gs/m/1001807


179 Likes228 DownloadsFebruary 16, 2024





This model is restricted by licensing terms. 
179 Likes228 DownloadsFebruary 16, 2024
This model is restricted by licensing terms.