This set of nine unique mushrooms features a stochastic Voronoi infill lattice with inserts for 1/4” by 1/8” cylindrical neodymium magnet. A 6mmx3mm cylindrical magnet will also work but may need a dab of glue to secure.

See here for video: https://youtu.be/b_EHGUCVDcs

This set includes nine unique models. Each of the “Straight,” “Curve A” and “Curve B” versions has three options with different randomized Voronoi patterns. The mushrooms are approximately 40mm tall.

I recommend press fitting the magnets in place with a pair of channel lock pliers, no glue needed. See video for demo. If you find that the fit is too tight, you can widen the hole slightly with a 1/4” drill bit, or scale the model up very slightly.

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 with Phrozen Dental Study white resin.

See here for other sizes: Large: https://than.gs/m/863807 Small: https://than.gs/m/863815