Sup bros and brahs! Do you want your desk to look hella fly? Than I got a rad desk organizer for you!  

This desk organizer comes in 4 parts and can be printed without supports.

Hope you enjoy!

90's Inspired Desk Organizer

90s Desk Organizer.STEP

Want a mid-century look to your home? Look no further! This retro inspired table lamp will make your pad feel nice and groovy! Would look great with a shag carpet!

This lamp is printed in 2 parts and without supports. The lamp shade is made to be printed with 2 perimeters/shells with a .4mm nozzle. The base can be printed upside down without supports.

I used this light cord: https://www.amazon.com/gp/product/B08BTV947F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

You simply put the light socket through the hole in the base and screw on the socket holder. Then you screw a light bulb in and then put the shade over the top.

Hope you enjoy this print!

Retro Table Lamp

Retro Table Lamp.STEP

Get ready for spring plants with some contemporary planters! Make your mid-century dream home come to life with these planters!

Each Planter has stands that are to be printed with them to give it that mid-century modern feel!

**Print Settings**
I printed the plant stands at .3mm layer height for a wood grain look. I printed them at 15% infill with supports.

The planters themselves do not require infill and are designed to be printed with 2 perimeters/shells with a .4mm nozzel.

**File Settings**
The Wide Planter and Tall Vase has two separate stands to print out. The oval planter needs 1 Long Stand and 2 Short Stands.

Hoppy Printing!
#MarchMadness

Planters With Stands Trio

Planters With Stands Trio.STEP

This 15in (381mm) tall organizer is a perfect way to store your small plants! It would be great for any office/home office! It can store other things you may want as well; maybe spices or knick-knacks! 

**File Settings**
This organizer is split into 6 pieces. You have to print each of the leg components 3 times to have a complete model. They are described as Bottom Leg, Middle Leg, and Top Leg. The tiers are Bottom Tier, Middle Tier, and Top Tier. 

I printed the Legs with a raft so that they are secure when printing. I also printed them at a slower speed to ensure that there is no wobble. 

The Legs should be printed at a 15%-50% infill to make sure they are sturdy. I printed them at a .30 layer height to get some nice build lines to simulate wood grain.

The tiers are made at a .8mm thickness which should mean that only 2 perimeters/shells are necessary for printing. I printed these at 50% infill just to support the areas near where it interfaces with the Legs. 

**Assembly**
You start with 3 Bottom Legs and the Bottom Tier. After you slide the Bottom Tier over the Bottom Legs you can screw in the Middle Legs. Then you will slide the middle Tier on. You then screw the Top Legs on and finally slide the Top Tier on.

I have added tolerances to the threads and joints where the Tiers meet the Legs but, some minor sanding can be done to make sure every thing fits properly.

Let me know if you have any questions! Hoppy Printing! 

#MakerMadness

3-Tier Plant Organizer

3 Tier Plant Holder.STEP

This simple, yet elegant, jewelry stand has your organization needs covered! The top arm can hold necklaces, bracelets, and rings. The top tray is perfect for holding your earrings and rings. The bottom tray can hold watches, rings, bracelets, and whatever else you may want to place in it!

The print is broken into 5 parts so that you can print it in different colors and without supports! The posts thread together and the arm pressure fits into the hole at the top.

**Print Settings**
I printed the bottom tray at 50% infill to make sure the thread post is ridged. The top tray can be printed with 20% infill.

The posts should be printed at 50% infill to keep it ridged. For the posts a wide brim and slower speeds should be used so that nothing gets nocked over while printing.

Hope you enjoy this print!

Two-Tier Jewelry Stand

Jewelry 2 Tier Tray.3MF

Make your plants feel like they belong in your mid-century modern home with this stylish planter! This model is one of many I will be designing for a spring!

The potting space inside the planter is 4in or 102mm tall and 4in or 102mm in diameter. Perfect for planting some small succulents or little cacti!

The planter is broken into 4 parts. The Frame Top and Bottom snap together. The Bottom of the frame screws into the base. Then the Pot slides into the center through the grooves.

The Frame Bottom should be printed, on its back, with the teeth facing upwards and should be printed with supports. The Frame Top should be printed on its back as well without supports. The Frame Top snap point is made to be printed one way. It has angled inner piece which needs to be printed growing upwards. I suggest using an x-ray view on your slicer to see this inner piece to grow it correctly.

If you have any questions let me know!

Hope you are as ready as I am for spring!

Modern Planter 001

Tall Planter 01.STEP

Make your flowers feel like they belong in your mid-century modern home with this stylish planter! This model is one of many I will be designing for a spring!

Hope you are as ready as I am for spring!

Modern Vase 001

Small Planter.STL

This is a human scale, collapsible light saber inspired by lego! Live your childhood dreams and become a real life lego mini figure with this life size print! 

I have always loved star wars lego sets. They combined two of my favorite things! Now I combined those with another one of my favorite hobbies, 3D printing!

I hope you enjoy this print file as much as I do!

**Print settings**
The light saber body should be printed with supports.

The light saber cap doesn't need supports.

The blade is designed to be printed in vase mode for .4mm nozzles

What side of the force will you choose? 

Lego Inspired Light Saber

Lego Light Saber Extended.STEP

The Cactus Caddy is desk organizer delivered straight from the desert! Escape the cold winter weather or embrace the summer heat by printing this file! Either way your desk will feel a little hotter now with this 3D print!

This desk organizer was inspired by my wife. She is an elementary school teacher who has decorated her class with a southwestern theme for her students. 

This organizer comes in 4 parts, the cactus top, the cactus bottom, the planter top, and the plater bottom. There are 3 different bottoms for the planter, one with a divider, one without a divider, and a solid base which doesn't need the planter top. Hopefully these options will suit all your organization needs!

Thank you and happy new year!



The Cactus Caddy

Cactus Desk Organizer.STEP

Do you need to quickly decorate your home before guests arrive? Need some light for your book nook? Want to print a lamp? Well I got a solution for all those questions... The Modern Table Lamp (totally original name)

This lamp should work with any plug in lamp cord. Here is the one I used on Amazon: https://www.amazon.com/dp/B08BTV947F?ref=ppx_yo2_dt_b_product_details&th=1

I wanted to design a lamp that would fit in with a modern house hold so I designed this lamp! I hope you guys enjoy!

#custom

Modern Table Lamp

Modern Table Lamp.SLDPRT

The invasion has begun! A UFP has been detected in your slicing program! There is nothing you can do to stop it!

This UFO inspired model is packed with tiny features! Its dome is on a hinge so that you can open it and put lights inside! I used tealights to light up my model, but you can use any battery operated lights! Also, you can raise and lower its legs that are built on a ball and socket mechanism for when you want it to land or fly! Lastly, the model includes a tractor beam style pedestal to raise the UFO off the ground!

 Enjoy this print! I had a lot of fun making it!

#custom 

Un-identified Flying Print

UFO.STEP

This idea came to me when I was working on a project and realized I was distracted by my phone and couldn't get any work done. So I created this little desk device as a solution to my problem!

This phone holder uses rack and pinion gears as the mechanism for the flipping and extension springs for it to return to normal.

This has helped me to keep my phone distractions to a minimum and hopefully it works for you too!


Here is a video of it working:
https://youtu.be/44wTEteKXZM

Link to the instructions:
https://drive.google.com/drive/folders/1NkomJuYBcpDv6sNi0wgLBlRD7DlKTLYx?usp=sharing

#DIY

Motivational Phone Holder

Motivational_Phone_Holder_Assembly_Thumbnail.STEP

Motivational_Phone_Holder_Assembly.STEP

External_Enclosure_updated.STL

Motivational_Phone_Holder_Thumbnail_2.STEP

Bring some industry to your desk with this mini cargo container desk organizer! 

This desk organizer features an opening to store writing utensils as well as 2 drawers that can store other small supplies. I also made a stand for stacking 2 cargo containers on top of each other.

Container homes really inspired me with this 3D model and I hope it inspires your creativity too!

#DIY



Desk Cargo Storage

Desk_Cargo_Container_Stacked_Thumbnail.STL

Bring coloring to the Jurassic period with this dinosaur inspired crayon holder! Do you have a love of dinosaurs and coloring well this model is for you!

This was modeled after the friendly brachiosaurus who was a part of the herbivore dinosaurs during the late Jurassic period. I designed it have a simplified smooth look so it would look kid friendly on a desk.

This model fits a standard pack of 24 crayons.

I hope this will inspire your creativity this school year!

#DIY


Crayon-o-saur

Crayonosaur_MM.STL

Be one with the light or darkside with this lightsaber inspired by everyone's favorite building block theme. Store your school supplies in style!

This model has two different file types, one marked STORAGE and the other marked SHARPENER:

STORAGE - This is the model that has a removeable base for small school accessories.

SHARPENER - This is the model that has a removable base that allows an added small pencil sharpener to be placed. 

May the force be with you this school year!
#DIY

Block Lightsaber Desk Organizer

CM_Lightsaber_Pencil_Holder_FOR THUMBNAIL.STL

Celebrate your creativity this school year with a building block organizer! Build your desk organizer the way you want it with these different prints! 

These blocks are modular so you can mix and match into different configurations. You can use the smaller plates for paper clips and thumbtacks. You can use the bigger ones for pencils, pens, or even add some life to your desk with a plant!

Enjoy the new school year!

#DIY #Backtoschool

Building Block Organizer 

CM_Block_Organizer_Assembly.STL

These planters are meant to be mounted on the wall. They have the option to be self watering by using gravity. The planters have water flow options going right, left, and center. There also are planters that have no holes so that the water doesn't leak onto the floor. I hope you enjoy these models and I encourage you to try different options on your wall! #garden

Wall Mounted Self Watering Planters

All_Planters_On_Wall.STL

With this membership you will get access to all of my premium models. It also gives you the ability to print and sell all of my designs. The commercial license does not permit you to sell my files. 

Commercial License  

This membership gives you access to all of my "fun" models including my premium Printer Pals. It also gives you access to all of my "functional" models this includes premium organizers, containers, and other models.

Fun-tional Prints

This membership gives you access to all of my premium Printer Pals! 

Be a Pal! 

What if we kissed under the Missile Toe? This goofy design was a fun project to work on! I hope it delights your guests this holiday!

Missile Toe

Missile Toe Nail.STL

Missile Toe Payload Detailed.stl

Missile Toe Payload.STL

Missle Toe Body.STL

Need a fun way to store your jewelry or a cool gift for your friend? Look no further! This crystal jewelry holder is perfect for you!

The files include a hex shaped dish or elongated hex dish to suit your organizing needs!

-.2mm layer height
-15-25% infill
-No supports needed

Crystal Jewelry Holder

Crystal Jewelry Holder Circle Dish.STL

Crystal Jewelry Holder Crystal.STL

Crystal Jewelry Holder Hex Dish.STL

Crystal Jewelry Holder Wide Hex Dish.STL

Get those grills ready for summer time BBQs! Did I say grills? I meant to say heat beds! Print a summer time favorite, the Hot Dog Man!

This model is an update to last years hot dog man. I updated the legs, added a face, and made it more stable sitting.

**Print Settings**
-.2mm layer height
-15-20% infill
-Supports needed for the hot dog

**Assembly**
-Print all parts
-Pressure fit them together
-Some gluing or sanding maybe needed due to tolerances

Hot Dog Pal

Hot Dog Pal Bun.STL

Hot Dog Pal Dog.STL

Hot Dog Pal Face.STL

I am an industrial designer who graduated in 2020. I am very passionate about designing, 3D modeling, and 3D printing.


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

CM Design

Pinned models