Benny's Head and Helmet

This head and helmet go with the Classic Spaceman that I have designed. Together they make Benny from the LEGO movie!

Printing Instructions:

• STLs already in suggested printing orientation
• No supports needed
• I would always recommend using a brim if you're not certain about the bed adhesion of any of these parts. In particular, the hands and arms can cause issues if there is poor adhesion. 

Filament Used In Pictures

This is a list of the filament I used while making this model. I receive no money from you clicking these links, and there may be better choices. This is just what I had available and what I thought looked good! Hope it helps :)

• Hatchbox Light Blue
• Hatchbox True Red
• Polymaker Charcoal Black
• Polymaker Yellow

Required Parts/Tools for Assembly:

• 3D Printed Parts [Filament]
• • Body
  • • 1x - Head [Yellow]
    • 1x - Head - Black Inserts [Charcoal Black]
    • 1x - Head - Red Insert [True Red]
  • Accessories
  • • 1x - Helmet Assembly [Light Blue]

• Tools (ALL OPTIONAL)
• • Super Glue (for holding figure in one position/pose if desired)

Assembly Instructions:

Head: The head is pretty simple - everything just press fits in as seen in the photos!

Helmet: The top of the helmet just presses down onto the lower half. It's okay if the inside of the lower half is a little messy, there's space between it and the head.