Are yo bored of theses blend and boring pen holder? do yo want to flex in front of your coworkers? Do you think communism is a good thing ? ...(sorry got lost a bit here).
Make of your desk a Solarpunk example with this cool organic pen pot moss planter !
This has every aspect of a good pencil holder, with his angled slope to let you grab your pen easily.
but WITH A TWIST ! by adding moss you'll transform it into your own little garden.
so every time your annoying college Debby, come to talk about her dumb cat again you can relieve the stress by misting your moss and seeing it thrives !

Organic pencil holder mini garden

Pot support.stl

I chose the best time to upload this candleholder, after halloween , Christmas and Valentine's day, finger crossed a priest with a 3D printer needs to burn candles for easter.
Enough rants, this candle holder was designed for maximum cool factor, with this organic shape even you aunt Cristiane will be impressed.
If your mariage is in a rough patch (and your sex life in shambles), this candle holder Its the perfect occasion  to fan the flame with a romantic diner, (let me know if it works).

There is two part to it, the white one is the structure and the orange one goes inside.
It have a ring to maintain the candle under the hole so it doesn't burn the plastic, there is a second version without the ring if needed. 

Organic Candle Holder

Candleholder Outside.stl

If your wife keep disapproving your hobby even thought it's been the third time you print her those flexible soooo satisfying dragons and this baby axolotl that she found on Facebook.
If she keep telling you to that you don't need to buy this wood filled metallic filled mat marble purple PLA even if she just bought herself a new handbag (because she's been stressed lately that one time at work).
IT'S TIME TO SHOW HER YOU LOVE IN RETURN ! with this very cute card that will remind her that even if it says that she comes first, It was still made thought the machine SHE DESPISE THE MOST.

Or…in a healthy relationship …It can just be a funny valentine's gift…

For backplate: 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #12 (1.04mm) swap to Pink
At layer #18 (1.52mm) swap to White for the rest.

Love Card

Backplate.stl

It's part of an experiment I made using womp3D, I promise I won't make too much of them.
Flashing this bad boy will brighten you day and soften your heart with his big blobby eyes

Cute Flexi snake keychain

Snake STL.stl

Ok there is a lot of things  to say here:

**1.** This is a remix of the incredible gyroid shoes by DaveMakeStuff, so all credits to him.
The opening was widened to allow the feet to get in and out.
**2.** **THIS IS NOT AN EASY PRINT !** I made it as easy as possible but it was only tested on well tuned Bambu X1, do it at your own risk (and be sure to share to help others)
**3.** Use TPU, (personally used a 95A).
**4.** Use (slim) **TREE SUPPORTS**, the reason is that the model was raised to not get a flat sole and if your printer is well calibrated it's actually surprisingly easy to get off. (see pictures)
**5.** For the same reason, there is a small part under the shoe so it doesn't automatically lay flat on the bed,** IT'S A BIT FAR AWAY**, feel free to lower the shoe closer to the bed.
**6.** Its not perfect, the original design was no designed to be worn, and the sole is practically non-existent.
**7.** Fo an easier time I varied the scale for popular shoes sizes, I only wore the US8.5 EU42, so let me know if it works for you too.

With all of that said Its still an amazing shoe to wear, the design is beautiful and I would say that it feels pretty close to crocks.
The pictures are of the shoes without the widened opening, I'm still waiting for a new TPU roll, but with similar design should come similar results, I'll update when done.



Wearable Gyroid Shoes

US8.5 EU42 Left.stl

*** Not for commercial use ***
Support my work & get access to commercial licence on  [my Patreon](https://www.patreon.com/Benoitperocheau) 
You can also follow my work on [Instagram](https://www.instagram.com/benoit_perocheau/)  for more.


Ok here is my take on a simple yet elegant/premium fidget toy.
The main gimmick is the fact that you can easily change the cover of the fidget with an other one, so you're able to fully customize it.
Here is a [video on how to do it](https://www.youtube.com/embed/V-0dO7u5wSU?si=OMVDf--rEu8Ek4pJ
): 
There are multiple covers available, most of them are multicolor but achieved thought changing filament at a certain layer so doable in any printer.
All the instruction for each cover are down in the attachements (.txt)
More covers to come here and on my Patreon

You can also easily make more custom using the blank cover model (just called COVER)
It's easy to print, easy to assemble, [here is how](https://www.youtube.com/embed/h2goCsMUyUI?si=15NTVCxNLLeE3PuN)

The only thing needed is 3x6 magnets that you can [find here](https://geni.us/fidgetmagnet )
Smaller magnet would work but I found that 3x6 had the best feel to it.

Input and suggestions are always welcomed

Hueforge ID #16426

Customizable Fidget toy

MAIN BODY.stl

Who said Christmas...Hum halloween, sorry, is not funny?

Cough No one! cough

Ehhr, I'm here to show my latest creation that will make your friend(s) laugh ...or cringe wile saying "this printer needs to be taken from you because you really print useless stuff".

Whatever, who really needs friends anyway, while you can question your life choices looking at this cute Panicked pumpkin flower pot.

Be sure to send a picture of this printed planter to you ex so she/he can finally realise what she/he missed.

PERFECT PANICKED PUMPKIN PLANTER (ALL SIZES)

Distressed-Pumpkinsize_mm-50.stl

I designed a fully parametric print in place Rod support for curtains rods.

I was designed using generative design under Fusion360.
You can Access all the rods sizes from 10 to 80mm with a 5 mm increment
You can also chose the exact size if you open the file inside Fusion360, Here is a tuto on how to do this:
https://imprimantre.com/pour-bien-commencer/liste-des-tutoriels/how-to-use-a-parametric-file

If you appreciate my work, a like is always appreciated

3D PRINTING SETTINGS
-No support

Parametric rod support bracket all sizes

Rod-SupportDiam-40.stl

Rod-SupportDiam-80.stl

Fully parametric wall planter, multiple sizes for 1 mount, can be printed without supports.
I would advise for 100% infill to prevent any potential water from dripping.
The inside part is optional.
The fully parametric file is the f3D source file and can be opened and modified inside Fusion360, Here is a tuto on how to do this:
https://imprimantre.com/pour-bien-commencer/liste-des-tutoriels/how-to-use-a-parametric-file

Feel free to improve or modify the current design and a like is always appreciated !

3D PRINTING SETTINGS
-no supports
-100% Infill

Parametric wall Mounted planter

Faceted_Planter_Large.step

Faceted_Planter_Medium.step

<p dir="ltr"><span style="white-space: pre-wrap;">Just designed a new shoe, I'm not a 100% satisfied of it as it is a bit bulky, so I'd love the input, should I release a beta version of (would you print it ? ) it or should I keep working on it until it's perfect ? </span></p>

 Just designed a new shoe, I'm not a 100% satisfied of it as it is a bit bulky, so I'd love the input, should I release a beta version of (would you print it ? ) it or should I keep working on it until it's perfect ? 

New shoe, need your input !

Erratic Designer, I just know how to design stuff and quickly.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Benoit Pérocheau

Designer posts