Scrabble Letter U

This is the large scrabble letter U, it's 89mm in length, and 89mm in width, and 4.15mm thick.

This is a very simple model to print, it requires no supports.

Care Bear Tenderheart Pokeball

Bisounours_Grosbisous_Ball.stl

Xbox controller button blocker - Series SX

A clip-on that blocks the xbox, view and menu buttons.

Requires no supports.

chess.stl

This is a **chess pawn** I made myself in blender. You can use this as a **test print** for your 3D-printer or just print this for fun.

LILITH DIABLO COSPLAY SET

uploads_files_4544079_Blow_up_fbx.fbx

Llama Puzzle (Large)

B_head_details.stl

3D Printable Postmodern Chess Set – Geometric Minimalist Pieces

Knightx2.stl

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

STEEL WALL FORTNITE MONOPOLY

I designed this to replace the paper walls that come with the Fortnite monopoly

All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.



Nintendo Switch Thumb Grips Box/Holder

Cults - NS box 3mm magnets.3mf

Sphere Puzzle Nr 5

Sphere_Ball_puzzle_5_piece_nr_1.stl

Fantasy Nightsong Dame Aylin Armor Shoulders Baldurs Gate 3

Nightsong_SP_Z.fbx

Scrabble Letter A

This is the large scrabble letter A, it's 89mm in length, and 89mm in width, and 4.15mm thick.

games

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Scrabble Letter U

Care Bear Tenderheart Pokeball

Xbox controller button blocker - Series SX

chess.stl

LILITH DIABLO COSPLAY SET

Llama Puzzle (Large)

3D Printable Postmodern Chess Set – Geometric Minimalist Pieces

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

STEEL WALL FORTNITE MONOPOLY

Nintendo Switch Thumb Grips Box/Holder

Sphere Puzzle Nr 5

Fantasy Nightsong Dame Aylin Armor Shoulders Baldurs Gate 3

Scrabble Letter A

Crate 6 slot SD Card Holder(easy print)

Kirby King Dedede

T60 Helmet - Fallout 4

(Easter Bunny Egg) Fidget Spinner

Jack Skellington Christmas edition Pokeball

To play the chess game of your life - Set of bookmarks

GTA Commander Collectable