I have different kinds of retail ammo loading trays, most of which are meant to be universal, and while they tend to work for most rifle loads I use, they're big and bulky and take up lots of space on

Bird Feeder is an accessory for your progressive reloading press.

Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine and holds oil

Brass Prep Station for trimming/chamferring/deburring + cleaning primer pockets. 6 posts for running everything needed!

This is an Akro Bin mount for the Hornady LNL AP progressive reloading press.

First, this was inspired by https://www.thingiverse.com/thing:4739172 However its not a remix as no parts from that thing was used to make my design, it was used for inspiration from the gearing persp

This is a storage tray for reloading dies. Made special for HORNADY dies with Lock-N-Load Bushings If you need it for LEE Precision dies with and without breech lock rings please see other version I

Case neck and bullet concentricity gauge for reloading (supports for 308 and 223). Kind of based on one of the $300+ aluminum ones I've seen. Uses pretty much any dial micrometer, I used a $25 Wen o

Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Thi

I designed this organizer to help me to keep my reloading desk from getting as messy and to keep frequently used tools close at hand. It is cost effective for me to reload .308 but that is about the o

Customizable Reloading Block

This is a Reloading Die Wrench for both standard nut size and Lee Dies.

Any version

Dashboard designed to receive some switches and speed controllers to equip a Lee reloading press

This is just an add-on to the brass prep station by WillitPrint3D

A pegboard storage solution for Hornady Lock-N-Load dies.

Here is a video of the design process on these designs: https://youtu.be/BBmjHiFwWYQ These files are low res but are close to in game replicas of the Graveyard key and Reloading tool in the game Re

I often find myself working on multiple batches of various stages of ammo in my reloading. I wanted a way to flag each batch, as to what stage it was in or needed next. While watching my wife stick li

This is design to hold the Cabela's brand Kinetic hammer bullet puller and its different collets. Install peg board holder on pegboard before gluing. Make sure to have the pegboard holder high

Compact and Stackable reloading plates all same size for all of them. Making then fit needly when they are not in use.

A 50 round, 6.5 creedmoor reloading tray. Holes are .49" diameter, for a secure yet drop-in fit.

This is a project I have been working on for a bullet counter for an automated Dillon reloading machine. The box is specific to fit sparkfun open segment display www.sparkfun.com/products/11644. All t

I wanted some nicer labels for my Akro bins I use to hold my brass for reloading. After not finding any, I went and made my own on Tinkercad. After slicing with Cura, I previewed the layers, and ins

NOTE: This is a living breathing design, I will be constantly tweaking it so ideally check to see if there is a new stl if you find issues. If using the Hornady Lock n Load System with Lee dies, t

ATTENTION! this is a beta version. It works good but have some troubles with beautify. I will make final version in may 2017 Printed with 0.4mm extruder 40% infill for very dtrong items. T

This is a round counter for Dillon 650/750 Reloading press remixed from a Dillon 1050 counter.

A box I printed to hold a set of rifle reloading dies and shellholder for a set that came without a box.

This is a remix from Cyboli's die storage tray. I wanted to be able to store loose dies or a Lee quick change turret with dies installed. Using Tinkercad, its been widened to allow for the recessing f

Powder Knob with grub screw for Dillon 550 Reloading Press

This is an exact model of the standard Lee Precision No. 19 Shell Holder commonly used for reloading 9mm Luger. This differs slightly from the one used on the lee turret presses as that one has an ext

Made my own storage box and ammunition tray for 6.5 Creedmoor that uses minimum plastic for printing and holds six dozens of cartridges. Best printing results with 0.4mm nozzle, no support, no fill.

ETA 9/12/2020: I saw a similar tool sold by an online reloading site, for about $4 + shipping, and figured that I could just make my own, so I guess this is a "remix". The original is made to fi

Improvement for Lee progressive reloading presses in form of case retention components that are to be added to stock press of following type: Lee PRO 1000 , Lee LOADMASTER, Lee AUTO BREECH LOCK PRO

Neck bushings organizer, wall-mounted. For 308 and 6.5 Creedmoor bushings. One for each, and one for both. Posts are slightly angled upward so bushings don't fall off.

**** New upload: 223 & 308 bushings **** New bushing deigned with wider top flange to keep debris from the bearings I designed this part to use interchangeable bushings to hold and trim th

The is a prototype of a wrench used to tighten/loosen the nut on reloading dies.

My dad has these reloading trays that he really likes that are stepped, but they're too deep for reloading 9mm. He also has these flat trays that are perfect for 9mm, but he really wishes they were st

This is a set of spacers to enable Minishell (or any other shortshell) reloaging on a Lee Load All reloading press. DISCLAIMER: Ammo reloading is inherently a risky activity. Failure to adhere to s

As I liked the idea of having labels built into the holders for the pegboard as I am setting it up, as there is only a…

Bullet and brass tray for the Hornady Classic reloading press.

this is a case holder for 80 .308 winchester shells designed primarily for reloading however if you don't like carrying boxes of ammo this can work too. two things you should be aware of before printi

The Real Life Wunderwaffe DG-2 from Call of Duty: Zombies created by Andrew of The Ray Gun Project (YouTube).  Watch this video to see all the features of this iconic prop: https://youtu.be/aU-9EFjIy

Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever.…

Gridfinity 1X1 washer ring remix to better hold spare reloading lock rings.

Any version

This is a mounting bracket one of my friends asked me to mock up.

Shaker sorter to align 9mm shells to help in removal of 380 auto brass. Build uses heated 4mm inserts for screw retention. This is a remix of the Armanov gauge loader orginally published by Hemk

You could, of course, buy the lovely red-anodized aluminum tool from Hornady (I have one, it's great. But also overkill and overpriced). Really... they should've included this chunk of plastic with th

Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Thi