These are parts to build a LoRaWAN antenna. The measurements in pic5 are millimeters and for 868 MHz. I use isolated copper wire, diameter 1.1 mm. The coil is 10 turns on 6 mm drill. It is designed

2 piece protective housing for the MakerFabs Soil Moisture LoRaWAN sensor

Case for the CH2i board with LoRaWAN Modul, Arduino pro Mini and BME280 with short helix antenna. See here for more details: https://www.thethingsnetwork.org/forum/t/lora-bme280-environmental-node-wi

This is my redesign of the excellent case design produced by @Amedee. I liked the case but wanted to shuffle things around a little - moving the connectors to the rear of the chassis, and adding an

This is a remix of the design by diyron. The LoRa antenna that came with my RAK2245 was the short dipole type with a cable connect directly to the board (no through post). I added a simple clip to hol

This case is designed for Raspberry Pi Zero W combined with RAK Wireless RAK2245 RPi HAT Edition. The lid and the body…

A simple case for the SparkFun ESP32 LoRaWAN Single Channel Gateway. (Gotta protect the connector.) It has a [small OLED screen](https://www.sparkfun.com/

Diese Halterung ist für Saugnäpfe. Sie hält eine RAK mit 5.8dbi...

Case for (ESP32 Dev Module) LilyGO TTGO T3 LoRa32 868MHz V2.1.6 ESP32 as used in my project as described on https://github.com/gtmans/TTGOwateringsystem/tree/main/lorawan

Mini Ultra LoRaWAN Enclosure A 3D printable enclosure has been created to house the Rocket Scream Mini Ultra LoRaWAN device with pin headers and battery holder installed. The enclosure may need to be

A LoRaWAN Gateway based on the Seeed Studio WM1302 Gateway HAT on a Raspberry Pi Zero W

Enclosure for DIY "The Things Network" LoraWan gateway: Raspberry Pi + RAK831 + RAK backplane

Note This design is based on the specifications as the gateway is not available yet! Summary This is a remix of my RAK831 enclosure, this time for the [PiSupply Gateway](https://www.kicks

Build your own GPS LoRaWAN Tracker. This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0) Choose a top and a body from the matching parts for your board version. Depen

This is a basic holder for a TTN (The Things Network) DIY gateway using the iC880A Concentrator and a Raspberry Pi. These are the instructions I followed: https://github.com/ttn-zh/ic880a-gateway/w

Simple enclosure for the PiSupply LoraWan TTN Gateway

Compact enclosure for DIY "The Things Network" LoraWan gateway: Raspberry Pi + IMST iC880A + coredump.ch backplane

Enclosure for RAK831 LoraWan Gateway. The enclosure allows air circulation to avoid overheating. BOM Aside the Raspberry Pi, the RAK831 LoraWan gateway and its converter board you will ne

The Dragino DLSO8N Outdoor LoRaWAN Gateway comes with mounting brackets for both the gateway itself and the antenna that I do not particularly care for. I created my own brackets to replace them. Thes

A case for the universal low power LoRaWAN sensor node LoRaProMini used as a mailbox monitor. Based on ATmega328P MCU (Arduino Pro Mini) and RFM95W/SX1276 LoRa Transceiver.  

This project contains a panel with a N-Plug outlet. It is used for the "<a href="https://www.thingiverse.com/thing:2879187" target="_blank">Enclosure for DIY LoraWAN Gateway based on ch2i Backplane</

I recently bought a lorawan antenna and wanted to build a stable and working construction. You can simply modify the OpenSCAD file according to your needs, by using the customizer. This constructi

A case intended for a simple environmental monitoring node. The circuit is based around a 3.3V low-power design. It's sized for the following components. There's also room in the case for another

A stand to hold a raspberry pi and a LoRaWAN gateway card together.

Build your own GPS LoRaWAN Tracker. This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0) Choose a top and a body from the matching parts for your board version. Depending

This is a case for LoRaSmartMeter, my SML electricity meter LoRa Adapter

An rugged box for mounting the a Lorawan water level sensor type Dragino LDDS75.

CAD of the M5Stack ASR6501 LoRaWAN module, with antenna.

This is a shroud to let you externally mount a Dragino LPS-8 "The thing network" LoRaWan gateway. It is fairly basic but sufficient I think to protect the gateway from rain etc... Print in PETG fo

I designed a case for the Dragino LoraWAN GPS Tracker board. You can find all the details at https://www.connectix.nl/3d-printed-case-for-the-dragino-lgt-92-gps-tracker/ You need a Lipo battery,

Compact enclosure for DIY "The Things Network" LoraWan gateway: Raspberry Pi + IMST iC880A + ch2i backplane This is a simple and compact enclosure for a DIY [The Things Network](https://www.the

Mini Ultra LoRaWAN Enclosure A 3D printable enclosure has been created to house the Rocket Scream Mini Ultra LoRaWAN device with pin

Adaptación de la tapa y de la caja del diseño original para darle un poco mas de seguridad, ya que estará a la intemperie. Aun en diseño final.

Gehäuse für M5Stack Fire mit GPS und Lora868 Modul Projekt stammt von: https://www.bjoerns-techblog.de/2019/04/ttn-network-tester/ Ich hab nur das passende Gehäuse für alle Kabel gebaut. So da

I have build a RAK831 LORA Gateway based on Charles Hallards 1.4 PCB, which you can find on GitHub. For this gateway I designed a housing. Cover and base case fixed by 4 M3 countersunk screws. In the

This is an example of a nice LoRa application. The weather station contains a temperature sensor, air pressure sensor and humidity sensor. The data is read out and sent to Cayenne Mydevices and Weathe

Helium Hotspot antenna holder for windows - stock antenna RAK, Nebra

An add-on antenna mount for @amedee 's LoraWan node enclosure

This is a cover to allow you to externally mount a LPS-8 lorawan gateway (for the thing network). It is pretty basic but seems to do a good enough job on protecting it from the elements. I recomm

Case for Heltec Cube Cell HTCC-AB01 Dev-Board, Battery 45x20x8mm 700mAh, DS18B20 Temp-Sensor, Antenna. And 4x sheet metal screws 2.2x6.5mm. The case ist water-resistant, when you mount it with the

A small case for a ESP32 LoRaWAN module (single channel gateway) Inspired by https://www.thingiverse.com/thing:3341310 FreeCAD design file included as always!

This is a simple enclosure for DIY LoraWAN GPS Tracker, based on ATMega328P microcontroller, Quectel L80-R ultracompact GPS module with an embedded patch antenna, and Hoperf RFM95W LoRa long range com

This case is designed for Raspberry Pi Zero W combined with RAK Wireless RAK2245 RPi HAT Edition. The lid and the body have no tolerance to each other. So the fit can be very tight. ht

Holder for the RAK831 LoRaWan gateway. I wanted to place the gateway outdoors (under the roof of my shed) and needed a custom-made holder. I've printed it using PETG given the outdoor conditions (t

The Dragino DLSO8N Outdoor LoRaWAN Gateway comes with mounting brackets for both the gateway itself and the antenna…

If you are using TABS (LoRaWAN) sensors from Browan you get sticker pads to glue them somewhere, but what if you need to replace the battery? Using this holder enables you to glue the holder and have

Compact enclosure for DIY "The Things Network" LoraWan gateway: Raspberry Pi + IMST iC880A + coredump.ch backplane This is a simple and compact enclosure for a DIY The Things Network [1] gatewa

Raspberry pi 3 case for LoRaWAN

Backplane to mount a raspberry pi + Multitech mCard-LoRa + china export 10Dbi antenna and a stepdown converter to 5 volt 3Amps.. https://github.com/mirakonta/lora_gateway/wiki updates expected http:

CAD of the M5Stack ASR6501 LoRaWAN module, with antenna. Useful if you want to design IoT modules and just import external components. I haven't modeled the interior. .F3D, .STEP and .3MF of full mod