This is a housing to mount a power switch on the side of the DJI FPV goggles. The switch mounts to the goggles by…

STL is from DJI source :) You can print it, but will not fly ;)

Please see this article for help on how to assemble this frame: https://www.hackster.io/scottpowell69/dji-fpv-3d-printed-drone-a81674

DJI FPV FIN

I designed the perfect fpv drone mount. Fastening does not require the use of bolts or other fasteners. Support required for printing.

GoPro style mount for DJI FPV drone. 6 point mount. This thing wasn't tested yet.

Most accurate DJI fpv 3D model

Open-source connector model for DJI FPV drone propellers, easy install/removal.

Cable management solution for charging DJI FPV batteries.

This is a rugged latched case for the DJI FPV drone. This is a work in progress!

Stand for the DJI FPV Drone - display without the battery installed.

Hello, this is a bumper for the DJI FPV. It is best to print the whole thing from TPU.

DJI FPV Drone

No supports needed. Transmitter could be held in place with a small amount of double sided tape. I left as much room as I could for cooling and included walls to direct air flowing under the camera

Remixed DJI Air Unit mount to use metal camera bracket.

DIY Gopro Support for DJI FPV... Fixing at the front on the protective shield of the Guimbal without screws. Installation of the Guimbal cover always possible.

Hello Everybody, this is a holder for the DJI FPV drone for the skadis wall from IKEA. You can also use it for other drones. I would like to see pictures how you use it :)

Dji fpv pan&tilt for AtomRC Killer Whale Printer: Creality CR-5 Pro Base for the camera replaces plywood, which can be carefully removed without braking.

It's remix from https://www.thingiverse.com/thing:4884770

A simple mount for attaching the DJI FPV camera to fixed wing aircraft.

Remix of DJI Action 2 mount. Specifically redesigned to hold a 2mm perspex protective lens cover. I have broken the print into a flat packed arrangement that you superglue together after printing,

Ultra-light FPV mount for the DJI Action 2 camera. The final print only weighs 5.4 grams, so it is perfectly suited for light builds. I printed it with 95A TPU and the hardness of the material is

Case for the DJI FPV Goggles. Fits V1 or V2

A shelf/mount for keeping your DJI FPV Goggles and controller neatly on the wall

DEAR USERS. PLEASE SUPPORT THE AUTHOR BY RUBLE, AS PAYMENT DOES NOT WORK IN RUSSIA. THE PRICE OF THE MODEL IS ONLY 300RUB WHILE SIMILAR COST ABOUT 1000RUB. I HOPE FOR YOUR DECENCY AND HONESTY. REQUIR

Remix of the uncut mount for 35° and 25° degree as well as 2 antenna mounts.

this is a remix of uk_mokie's mount. My goal was to create a unit, which can easily be replaced with a Gopro or other equipment find a fixed spot for the airunit behind the big front opening f

Wall Mount 2020 DJI FPV Drone

a caddy for dji fpv accessories. please feel free to remix. picture shows print with PrusaSlicer fuzzy skin enabled.

DJI FPV wall mount for honeycomb storage wall

I "fly" an FPV drone simulator just as I fly a drone in the real world--with the DJI controller suspended from my neck with a controller neck lanyard. The DJI controller is wired into my PC while f

it's remixing the battery case with a more precise fit Use two 21700 battery and 3 pcs M2x7mm (or longer) change: thinner and wider shorter by a couple of millimeters the smaller button vers

Dji fpv googles battery case

This is built from a frame designed by https://www.thingiverse.com/ledroneclub/designs Frame-> https://www.thingiverse.com/thing:4660219 I ordered the frame custom cut from Cncmadness https://www.c

Universal Osmo Action mounts for FPV drones.

DJI Action 2 保护壳，用于穿越机 或者其他 兼容gopro底座 因为自己没钱购买DJI Action 2 ，这个保护壳和模型是根据官网参数设计的，和个人的设计经验， 如果有不合适的地方 轻联系我 V2版本 是优化后的 防撞的action2壳子 那些小的孔都不需要架支撑 可以使用cura 去掉 支撑 DJI Action 2 model and protective

A canopy for ZOHD Drift which can carry DJI FPV System lite (Vista/Nebula/Pro) Print with PETG or another heat resistance filament.

A simple battery holder for goggles V2. Holds very well in place, ultra light If needed, to get better clip, you can warm it into hot water and bend slightly the clip.

Just a simple wall mount for the DJI FPV Drone. Works for other drone models aswell.

Dji FPV by SDC Discover the new DJI FPV drone improved by SDC, with a body made of Carbon Fiber and more powerful camera and battery, the FPV and connected to a VR headset which facilitates the e

I remixed from DJI FPV Goggle V2 Battery Holder by CelSys to someone use for pocket ;V . buy me a coffee if you like this part https://paypal.me/hoangviboo?locale.x=en_US

mounts for O3 FPV on smaller scale RC cars

Canopy/Mount to carry the DJI Digtial FPV system on a nano sky hunter. Designed to print from bottom to top, as such it needs a lot of supports so ABS and PLA are recommended.

I know there's other DJI FPV len protectors out there, but I wanted a minimalist approach, so it would not interfere with the GoPro len sitting directly above it.

Lightweight and flat pan/tilt mount for a DJI FPV camera and a 5g flat tilt servo. To be used on top of a FPV plane.

Support GoPro Hero8 DJI FPV DRONE GT & Gabarit

A lens cover to protect your DJI FPV goggles. Fits well into V1 and V2 of the FPV goggles. Print in TPU, doesn't matter

Soporte inferior para colocar una cámara de acción en DJI FPV.

A cap for the DJI FPV Racer batteries.

Proppeler box for DJI FPV drone Thin and Sturdy Enjoy edit: I have been asked to scale down the box to 70%... added files scaled at 70% as the original model was not designed to be scalled