[#1 updated the design slightly with a tapered ptfe tube hole to allow it to slide in better] [#2 updated it a little more to make it smoother to accept filament] An easy print to enable you to attac

The X1C Mount Rotatable Spool Holder allows you to use a “608ZZ Bearing Rotatable For Filament Spool Holder” on your Bambu Lab X1C.   The Spool Holder is standard on most Creality Printers.  Using the

Update III 11-19-22:  Added a remaining filament measurement marks. These .2kg marks match the positions that Bambu Lab has on their spools. Even so, these are estimates at best.  Added to the follow

This is a remix of the original design by user Dlarsen. All thanks to him. This remix is for those who simply want to hang the filament holder on the side of the machine without the need to use doub

Remixed to narrow the depth to 100mm, so it fits behind the printer when pushed up against the wall with the external spool holder attached. I included a STEP file that can also be printed via Bamb

About This is an Adjustable Spool Holder for Silica Gel / Spool Weight developed specifically for the Hydra AMS and Bambu Lab AMS but it should be useful for regular dry boxes as well where the spool

I have combined the best features (in my opinion) of the three previous remixes. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Ba

Remix of Bambu spool holder by ImShogun. https://www.thingiverse.com/thing:5664696 Quicker print, with wider edges, and less material.

Smoother  spool holder for the Bambu, the supplied one wasn't very smooth , half empty rolls don't rotate very well.  Twist and click end cap to stop the roll falling off.  Endcap assembly needs gluin

Filament Clip for Bambu Lab spool holder, which help to prevent the filament tangle on spool, and also help to eliminate the last few cm of filament to break by the forced filament on spool holder ori

Move your Bambu Labs printer spool holder from the back of the printer to a free standing spool holder that you can more easily access by placing it to the side. I simply added feet to this great f

The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine…  So, I gave it some fe

Created an adapter so that I could use my already printed filler spool holder on the side mounted spool holder V2

#ThangsBambuContest i design this spool holder is set on printer side, not need hanging. *Need prepare* - 4x608 bearing for roller - 1 pneumatic fitting pc4-m6 for guide PTFE tube V2- pneumatic joint

This works great with    trutheframe's spool roller https://www.printables.com/model/278580-bambu-lab-spool-roller and guppyk's bearings Thingiverse: https://www.thingiverse.com/thing:4821342  

Allows you to have it aginst a wall and swapping filament without moving the printer. I had a problem with some filament rolls I had, not fitting on the Bambu Lab X1C spool holder. Couldn't find anyt

This is a spool holder to allow the Protopasta filament rolls to fit into the bambu labs AMS.  I remove the cardboard pieces on the outside of the protopasta roll and press these on each side one at a

This remix is based on another design: https://www.printables.com/model/348768-ams-side-mount-spool-holder-for-bambu-printers/files Specifically, file AMS side spool v3.STL. Just one problem: I have

2 sided spool and spacer.  Must print all 3 with most spools. Must adjust spacer to your spool size (15mm height seems to fit most mini spools) Standard 1kg plastic spools with a diameter of 200mm an

Side frame spool holder bracket for P1P.

This is a spool holder to allow the Protopasta filament rolls to fit into the bambu labs AMS. I remove the cardboard pieces on the outside of the protopasta roll and press these on each side one at a

Remix of the simple and nice design of “Bounet”, that uses the original Bambu Lab Spool Holder. Add a couple mods to it; -Some fillets to the bottom legs/feet, beefed the top where the spool holder

*****This is a work in progress - I am still testing the fit and finish of the Spool Arm - Left Rear.stl file***** I wanted to see if I could create a spool holder that would sit above the P1P in cas

I needed a cylinder spool holder mount for my Bambu Lab P1P, and I couldn't find one, so I made one. It fits onto the original mount, and is roughly the same dimensions as the stock one. I'm also an i

When I printed the “Bambu Lab Reusable Spool Holder Hex Remix”, I noticed that the printer is kinda bit violent on some sections and upon inspecting I noticed that the STL object doesn't have a proper

Spool holder spacer for the Bambu Lab X1 Carbon 3D printer! This simple accessory ensures smooth spool unwinding during printing and eliminates friction issues with the Bowden tube and the AMS connect