Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3872301. For the best thermal performance and space otimization i use trial and error to make the great project by Crashi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5020179. Remixed from the already excellent design by vl4dt3p3s, https://www.thingiverse.com/thing:3995301 My alterati

Usually when you buy the case only one of these is included but it's possible to install a second one Can be printed on Prusa Mini at 100% but only just about, try included 3mf file if you are having

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5262758. an adapter for this part: https://cults3d.com/en/3d-model/gadget/2x-hdd-caddy, or the maker's 1x version, for my

Required Hardware: 8x4mm Rubber Feet >>> https://amzn.to/3UgjvqW Introducing the GameBoy Case Display Tower, an expertly crafted 3D printed marvel designed to elegantly house and display up

Required Hardware: 8x4mm Rubber Feet >>> https://amzn.to/3UgjvqW Elevate your gaming setup to legendary status with our all-in-one GameBoy Case and Nintendo Switch Dock Station. This ingenio

Discover a highly detailed 3D model of a mini Milwaukee Packout Design Case available on thangs.com. This replica perfectly captures the essence of the full-sized Milwaukee case showcasing seamless de

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852139. This is my take on pimping out this raspberry pi case. It's got heat sinks, a 5v fan, and my fiber optic indicat

Cases for Bigtreetech SKR v2 and Raspberry Pi 3, assembled dimensions for between extrusions are depth 125mm x width 250mm x height 40mm Both cases set up for 40x10 fan and sliding lids, The standa

A nice case for your Bic Lighter! Fits a Bic Mini J5 inside! IMPORTANT I recommend print the first 5mm and stop the print. Then take it out and TEST FIT. If it doesn't fit, scale it 1-2% and go over

Basic phone case for the iPhone 12 Mini, I added some circles on the back for a neat texture. Designed to be printed with TPU or another flexible filament, if you are using a harder plastic like PLA,

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3906331. This is a mountable mount for a Micro ATX or Mini ITX motherboard. Not only can you mount your motherboard and

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3347315. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint serve

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5383216. A simple case to house your WEMOS D1 mini project. Features: Snug fit Reset button access LED view

A simple, clean, functional case for the Elecrow 5-inch HDMI touch screen. Elecrow [Amaz

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2906449. Remixed Bokix's [Nintendo Switch mini Game Card Case](https://www.thi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6366864. Raspberry Pi 0/02 3.5 inch Touchscreen Case My take on a case for a Raspberry Pi 0 with a 3.5-inch touchscr

Experience tabletop gaming like never before with this impeccably designed Mini Dice Tower, available at Thangs.com. Crafted with precision, this miniature model is a must-have accessory for enthusias

This adapter adapts the Ryobi 10 inch One+ Miter Saw (P3650) dust collector output to the Ryobi 6 Gallon Wet/Dry One+ Vacuum (P770ID). It may very well work for other miter saws and/or shop vacs but

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4596428. Warning: This is a very difficult print to pull of to spec. Advance printer only. How difficult? Should you atte

Case for a RPi 3A or 3A+ with a 3.5" GPIO touchscreen. It's perfect for a klipper / klipperscreen setup. I used the display from this kit, but any 3.5" 480x320 GPIO module should work : https://www.

WiFi Wemos D1 ESP8266 control box for temperature and humidity control by Supla Display cover must be tapped M3 thread ( the best way is to use screw before assembling it) In base tap M3 thread f

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3877555. This is... yet another addition to the SMuFF. It assembles a ca

What would the Aquarius have evolved into if Mattel hadn't abandoned the system back in 1984? The Aquarius+ is the next-generation of Z80-based 8-bit hardware for the Aquarius platform. The intent is

Printable easel, great for holding small thin items.

This 3D printed case is specifically tailored to accommodate the WeMos D1 mini variant of the ESP8266 microcontroller with various temperature or similar sensors. The model is designed to meet a range

【DC/DC Step-Down Converter Mini Case(MP1584)】 DC/DC ステップダウンコンバーター(MP1584) を収納するためのシンプルなミニケースです。 サイズを極力小さく設計しているので、3DプリンタのFAN交換による降圧や電子工作用途で便利に使えます。 2ヶ所の固定穴はφ3.3mmとなっています。 M3サイズのビスやタイラップを使用して固定することも出来

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5263477. A 4 bay storage spot for all of your drives in your modular case remix of: https://cults3d.com/en/3d-model/va

N06 - Small Travel case for Jewlery / Accessories. Cover/Case/Cylinder for protection/safety/storage. Total weight approximately 25g. Dimensions: Diameter 60mm - Height 41mm Minimum 2 wall loops adv

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4470694. This is a remix from the idea by jterranella (great idea by the way). I needed a bit of an angle (ca. 10°) to st

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4209713. I needed a better way to house the different 3rd party boards available for the Ender 3. I also wanted to change

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5156468. This is a remix of the NanoMesh Mini and it also includes the proper top for the NVIDIA Jetson Nano 2GB Develope

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4761866. This is a remix of my [first version](https://www.myminifactory.com/object/3d-print-samsung-galaxy-note-10-lite-

Hi, I bought a GoPro11 mini and tought it needed a cover!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4848834. ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my ot

Uploaded by Thangs Sync

Adapter plate vor mounting your BTT SKR MINI E3 V3 in your Creality CR-10 V3 control box. I supplied a 3mf as well as a step file vor easy editing.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6091648. Case for a Losi mini-t Urgenex battery holder https://www.amazon.com/dp/B08XZQ3NV1?psc=1&ref=ppx_yo2ov_dt_b_p

Uploaded by Thangs Sync

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4147362. Building a Prusa Mini from Scratch? Use this part to mount an MKS TFT35 V3 Touchscreen in the stock location, fo

this is my 3d model of my european style 10 inch chefs knife. I use this as a template. Have to print at an angle to fit on my printer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4851462. A Miniature Laptop insert for the Hinged Mini Pelican Case. Files for the normal sized case are labeled "Peli

Snap fit Case for the QRPGuys Mini Keyer V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4396359. I could not find a handle for the CR-10 mini so i made this one, Print it just the way it is. Enjoy

The factory front cover has no filter slot and has a noisy airflow design so I removed it immediately. It also added a lot of weight and depth to the case. This front cover provides direct airflow and

This a case for a Raspberry Pi 3B/+ , Adafruit Speaker Bonnet , and a USB Encoder with Joystock and buttons

Required Hardware: 8x4mm Rubber Feet >>> https://amzn.to/3UgjvqW Elevate your gaming sanctuary with our 3D Printed GameBoy Case Display Bar, specifically designed to showcase and organize up

Uploaded by Thangs Sync

This is an adapter so that any lyre can be attached to any phone or tablet case. the Lyre can be inserted into the adapter in 2 ways to allow both horizontal and vertical scrolling of the sheet music.