This is a medium sized 3D printed fabric clutch with 3D printed hardware that a snap style closure. There are spacers that can be printed to make the hinge a tighter fit. This was designed with the A1 mini in mind. This is a companion model to https://than.gs/m/1456033 as the hardware is interchangeable while being able to use different sized negative modifiers for smaller and larger bags. If you'd like a larger bag but this style of handle, you can combine parts from different models.

I print this with 25% honeycomb infill and 3 wall perimeters for added closure strength. Printing with silk PLA may lower the durability.

If you are starting from scratch, here is the process. Please refer to the included PDF guides for additional instructions.

Open a base textile (the example photos are using the dragon con textile found here - https://than.gs/m/1368954), followed by modifying the textile with the included medium clutch negative modifier. Center the modifier and verify it's scaled to 400mm x 400mm x 20mm, and it's z value is set to 0 (so it's intersecting the textile). Load in the textile clutch top STL onto the same plate, center, and move the Y value up so there is a uniform gap above the negative modifier. The last step is to add a pause command at layer 2, where fabric and magnets will be added. I print the hardware at a .2mm layer height, and the fabric at a .24mm layer height.

Print the included hardware at a .2mm layer height. I recommend 15mm/s bridge speed and 1.5 bridge flow. Remove the supports, and use some adhesive (I use e6000) inside the clutch hardware channel where the 3D printed textile portion slots into. Let it dry, and enjoy!

This requires basic sewing skills - a straight stitch and a zig zag stitch, a 3d printer, some mesh fabric, and about 30-60 minutes of assembly time depending on skill level. There is a PDF guide to show you step by step on how to print and assemble this purse, in addition to many other guides to help you further modify the design.

If you have any questions, please don't hesitate to contact me at Kaizen3DPrints@gmail.com

License Summary: Personal use only unless you hold a Commercial License. No resale or sharing of files. Selling printed models allowed only with an active Commercial License.