Save 25% on any Lofted Goods membership plan using the code "LG25"

This caddy prints in three parts - the caddy, handle, and a wedge to lock the handle in from the bottom. To assemble, lightly flex the ends of the handle and insert it in from the top until the tabs snap into place. You can stop there, but if you want to be sure the handle never comes out, you can put a couple drops of CA glue in the bottom and insert the wedge piece.

There are also two optional inserts for the square holes if you'd like to add some color to your caddy.

Supports None needed!

Scaling Can be scaled up or down.

Orientation The caddy and inserts should have their bottoms on the build plate. The handle and wedge should lay flat.

Print Settings .2mm layer height 15% grid infill 2 walls

Filament:

• Bambu Lab Matte Charcoal
• Bambu Lab Matte Dark Red
• Bambu Lab Matte Marine Blue
• Bambu Lab Matte Lemon Yellow
• Bambu Lab Matte Grass Green

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods