3dprintbunny24K followers

Follow

Ribbons and Strings Artwork 3d model

Ribbons and Strings Artwork 3d model

Ribbons and Strings Artwork

1.2K downloads · 3 years ago · A Ribbons and Strings artwork. Print at 0.3mm layer height. Choose Arachne wall generator if usi

This model is restricted by licensing terms.

View license.

A Ribbons and Strings artwork.

Print at 0.3mm layer height.

Choose Arachne wall generator if using Bambu Studio or Prusaslicer to slice.

Prints without supports

Community Makes (5)

Make by user

Great!
https://twitter.com/itsumonotakumi/status/1639395539971375104?s=20

Make by user

Make by user

Third attempt. Had to use supports to make it. Might be due to my filament or printer. This is the first model of 3Dprintbunny that I have not printed the first time. Most likely something on my end. Stronghero3D rainbow PLA, .4 nozzle, 210c and 60c, .3 layer, cooling on , 45 speed.

Make by user

Great!
https://twitter.com/itsumonotakumi/status/1639395539971375104?s=20

Make by user

Make by user

Third attempt. Had to use supports to make it. Might be due to my filament or printer. This is the first model of 3Dprintbunny that I have not printed the first time. Most likely something on my end. Stronghero3D rainbow PLA, .4 nozzle, 210c and 60c, .3 layer, cooling on , 45 speed.

Community Makes (5)

Make by user

Great!
https://twitter.com/itsumonotakumi/status/1639395539971375104?s=20

Make by user

Make by user

Third attempt. Had to use supports to make it. Might be due to my filament or printer. This is the first model of 3Dprintbunny that I have not printed the first time. Most likely something on my end. Stronghero3D rainbow PLA, .4 nozzle, 210c and 60c, .3 layer, cooling on , 45 speed.

Make by user

Great!
https://twitter.com/itsumonotakumi/status/1639395539971375104?s=20

Make by user

Make by user

Third attempt. Had to use supports to make it. Might be due to my filament or printer. This is the first model of 3Dprintbunny that I have not printed the first time. Most likely something on my end. Stronghero3D rainbow PLA, .4 nozzle, 210c and 60c, .3 layer, cooling on , 45 speed.

Discussions

dwoow222 years ago

Thank you again

scarface453 years ago

Bonjour

ET quand on utilise Cura c'est pareil ?

jimml12343 years ago

Your String Art Models are fantastic. Could you create a String Art Model of a Biplane and a 1890s Era Steam Locomotive ?

tietjen.christin3 years ago

Printing thin walls? I haven't tried but based on other models this might be it.

nfmine083 years ago

Beautiful design!

bosse.bark3 years ago

The Ribbons and Strings Artwork prints the beams but not the strings. What setting am I missing?

zealous3 years ago

Choose Arachne wall generator if using Bambu Studio or Prusaslicer to slice.

Prints without supports

mroses91668 months ago

Thanks for the tip using Arachne. Mine came out beautiful.

Ribbons and Strings Artwork

1.2K downloads · 3 years ago in

3dprintbunny24K followers

Follow

This model is restricted by licensing terms.

View license.