Kingroon KP5L runnout sensor connector
10 downloads · 4 years ago · This connector is used to attach the PTFE reverse Bowden connection from the filament runout sensor.
This connector is used to attach the PTFE reverse Bowden connection from the filament runout sensor.
Printed in PLA The sensor side of the connector is a bit tight, so I ran a 5/16 drill bit in in to clearance. After that it fit fine. I attached it will a small amount of hot glue. The PTFE tube press fit just fine.
Kingroon KP5L runnout sensor connector
10 downloads · 4 years ago in and
Kingroon KP5L Spool sensor top mount
Kingroon KP5L Starter Kit And Klipper Config
VESC Onewheel XR Switchcraft Blank Plug
Suzuki Swift Sport (ZC33S 2019 1.4T K14C) Intake
EspHome NodeMCU + Relay Case
Flowglider 20mm Cable Gland Remix for VESC XR (XLR, 6-pin Molex, Handle, LEDs, Empty Box)
Suzuki Swift Sport (ZC33S 2019 1.4T K14C) Intake
Bundle
SMARS V4 Lite
DuPont Wires Adapter(2×5)
Combined_Jam_and Runout_Sensor_Newest
Improved_Version_Filament_Jam_and Runout_Sensor
Arduino Thermometer Display
Tronxy X5SA dual gear direct drive
IoT USB Powered Motion Sensor
18mm.stl
30mm.stl
25mm.stl
raspberry pi workbench
Solar-Soil-Sensor with Battery
