More minimalist Star Wars! This time C3P0, in all his battle-worn glory! The 3MF will already have all the layer swaps already coded in, but if you want to use the STL itself, feel free to! Just follow the print instructions below:

Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 155.26x240mm in size You may print at higher layer heights below the Base Thickness of 0.44mm The Max allowed Thickness is 2.04mm and the Actual Thickness is 1.64mm

Filaments Used:

• PLA CC3D Orange Transmission Distance: 6.5
• PLA Siddament Yellow Transmission Distance: 5.5
• PLA META SUNLU Yellow Transmission Distance: 6.8
• PLA Kingroon White Transmission Distance: 5.8
• PLA BambuLab Matte Dark Red Transmission Distance: 1.5 This print uses 5 unique filaments

Swap Instructions:

• Start with Orange
• At layer #6 (0.6mm) swap to Yellow
• At layer #9 (0.84mm) swap to Yellow
• At layer #15 (1.32mm) swap to White
• At layer #18 (1.56mm) swap to Dark Red for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.