Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5324296.

Exhaust tips for the Element RC Knightrunner.
Cut of the stock plastic tip, these tips are designed to fit over the stock 7mm exhaust pipe.

Element Enduro Knightrunner exhaust tips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4873285.

I purchased this body model for an Axial SCX10ii and created some additional parts for it.
https://www.cgtrader.com/3d-print-models/hobby-diy/automotive/jeep-grand-cherokee-1977-body-for-print

The lights are for the left side only but you can mirror then in your slicer software for the right side.

The body mounts include a latching mechanism for the front, the rear is hinged. This works by using the stock front bumper mount.
You need to cut the mount a little and wrap an elastic around the latch to keep it in place.
https://www.youtube.com/watch?v=cJfBNwAiuCA

Cherokee 313mm addons

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5141136.

This is a lightweight spare tire cover for the Axial SCX6 Rubicon body.
The shell is made up of 2 halves that twist together. My print in PETG weighs 50 grams.

The dimensions are based on the stock Rubicon tires size.
Included is a blank version and a version with a Jeep logo.

The cover connects to the body with a bracket designed to replace the stock license plate frame.
Versions of the tire bracket with and without a 3rd brake light are included.

Required hardware: 
1x M3 10 to 18 mm to screw the back parts of the cover to the bracket.
2x M3 8 to 10 mm to screw into the bottom of the cover to lock the 2 halves.

The brackets print without support material.
Both cover halves require supports for the clips on the 10 and 2 o-clock positions.

Axial SCX6 Spare Tire Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3291811.

This adapter allow you to drive an RC car one-handed, use your index finger for throttle like usual, steer with your thumb.
Great for driving between obstacles on a crawler trail or when you're also trying to film while driving.
The inner diamater is 51mm/2inches, I designed this for a Spektrum DX5C radio but it will fit a lot of other radios, especially if it has a wheel that stick far outside the main body.
The clamp diameter will easily flex to 5mm larger or smaller when printed in PLA, 20% infill.
There is a groove to strap it on with a ziptie.
Printing a scaled version could help to make it fit other radios.

Demonstration video: https://www.youtube.com/watch?v=KRL_PJjuW-M

RC one-handed thumb steering adapter (DX5C)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3281890.

Oct 2020 update: the scale in the STLs was wrong. Use the fixed versions or print the originals at 10% scale.

A set of mounts to attach a Team Raffee Benz G-class hardbody to a MST CFX-W crawler chassis.
Replaces the rear bumper mount, hinged at the rear, uses the front bumper mount to screw shut, uses existing attachment points in the body.

Chassis:  
http://www.rc-mst.com/product.php?class_sn=25&class_sn2=126

Body:  
https://www.teamraffeeco.com/benz-g-class-4-door-hard-body-313mm-143641

Optional chassis servo mount, not designed by me but also work with this setup: 
https://www.thingiverse.com/thing:2630337/

![Inspected by cat for ultimate catisfaction](https://i.imgur.com/pxqYztd.jpg)   
Inspected by cat for ultimate catisfaction

CFX-W G-class body mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5209023.

A trailer hitch that bolts up to the SCX6 rear bumper mount without any mods.
Required hardware: 
4x M4x22mm
1x M2.5x10mm

Axial SCX6 trailer hitch tow ball

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4638457.

All parts I designed for building a folding roof tent for an RC crawler.

Demonstration of the tent:
https://www.youtube.com/watch?v=DdlTN_DGgg0

Pictures of build process:
https://imgur.com/a/uQwlZWu

Scale roof tent

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4248506.

My Arocs 3348 was sitting a little low in the rear.
I created this spacer to lift it a little bit.

These spacers are designed to work on the front and the rear.
The center hole fits over the rivet holding the spring leafs together.
Thickness is 1.5mm, this is all you can add without any other modifications.
The stock u-bolt have some thread left over in the rear, for the front you will need to supply 8 regular M3 locknuts.

Tamiya Semi Truck Suspension Spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4301049.

This small arm mounts your GoPro or other action camera to the bracket on the front of the Spektrum DX5 Rugged RC transmitter.
Use 2 20mm M3 screws to reinforce and clamp the arm to your radio.

Spektrum DX5 Rugged GoPro mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4405135.

A license plate frame with light for you Vanquish Products VS4-10 Origin, Ultra or Pro body. 
Prints flat without supports.

I like this tool for making plates:
https://www.acme.com/licensemaker/
Print your plate, preferably on a laser printer, and laminate the it between two piece of clear packing tape.

VS4-10 Scout license plate holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5236566.

A second valve cover for your SCX6, based on the same thing for an SCX10III. 
Print without supports, stick on your steering servo with some double sided tape.

Axial SCX6 Servo Valve Cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5186646.

The panhard bar on the SCX6 is mounted single shear on both ends. No bueno.
This brace reinforces the mount on the axle.
Uses the stock hardware, no additional parts needed.

To reinforce the chassis mount I recommend a metal shock tower replacement.

Axial SCX6 Panhard brace

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3625468.

I had 2 fenders on my VS4-10 snap where they are bolted to the chassis with 2 bolt next to each other, near the bumpers.
Maybe I screwed them in too tight.

These washers are supposed to reinforce that area.
Print 4, one for each corner of your truck.
Basically it's 2 3mm holes, 8mm apart and a bevelled edge for extra fanciness.
Regular version is 1.2mm thick, the thick version is 2mm.

Vanquish VS4-10 fender washer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5331372.

Decorative trailer hitch for the stock Knightrunner bumper.
Designed to print in TPU or other flexible materials.
No fasteners needed, it will clip into place.

Element Enduro Knightrunner trailer hitch

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3319458.

A scale accessory for  scale crawlers. Designed at 1/10 scale. 32x22x12mm.

First Aid kit

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5265315.

Printed in TPU for a less noisy ride. 4mm thickness.
Mirror 1 print for the rear tires in your slicing tool.
Should fit many Wilesco model steam engines, rescale for other models.

Wilesco Traction Engine Tires

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4378762.

A small and simple side mirror for your VS4-10, or other RC bodies.
Prints flat on its face, no supports needed.
I printed this in TPU so it flexes instead of breaking. Stick on a circle of aluminium tape or tin foil for the full effect.
This is so cheap and quick to print I choose not the require mounting holes, just glue it on.

Vanquish VS4-10 side mirror

My main profile @ printables has more models.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

zanthrax81

Element Enduro Knightrunner exhaust tips

Cherokee 313mm addons

Axial SCX6 Spare Tire Cover

RC one-handed thumb steering adapter (DX5C)

CFX-W G-class body mounts

Axial SCX6 trailer hitch tow ball

Scale roof tent

Tamiya Semi Truck Suspension Spacer

Spektrum DX5 Rugged GoPro mount

VS4-10 Scout license plate holder

Axial SCX6 Servo Valve Cover

Axial SCX6 Panhard brace

Vanquish VS4-10 fender washer

Element Enduro Knightrunner trailer hitch

First Aid kit

Wilesco Traction Engine Tires

Vanquish VS4-10 side mirror

Cherokee 313mm addons

Axial SCX6 Spare Tire Cover

Spektrum DX5 Rugged GoPro mount

CFX-W G-class body mounts

RC one-handed thumb steering adapter (DX5C)

Scale roof tent

Vanquish VS4-10 side mirror

Axial SCX6 Servo Valve Cover

Axial SCX6 trailer hitch tow ball

VS4-10 Scout license plate holder

Tamiya Semi Truck Suspension Spacer

Wilesco Traction Engine Tires

Axial SCX6 Panhard brace

First Aid kit

Vanquish VS4-10 fender washer