I ran the printer for a while without the filament guide, and when retracting, it made the spool bounce around a little more than I was comfortable with. I built this as an alternative to the top guide provided with the printer. You can print this guide with PLA or any other filament and with no supports needed. Reuse the clips from the guide provided with the printer sliding the tubing from the top toward the build plate.

Alternate AnkerMake M5C Filament Guide

The build plate guides provided with the M5 are great, but I wanted to use a smooth PEI plate. With this in mind, print two replacement guides using ASA or ABS, as they are durable materials. No supports are needed. 

It's worth mentioning that the build surface dimensions perfectly match those of the Ender 3.

AnkerMake M5C square build plate guides

remix of https://www.thingiverse.com/thing:4634422 the screws did not work for me so I added a "finger" at the top so it just slides on also did it in a mirror version for a right side vs left side mount. For the Elegoo Neptune 2 and dual fan duct I use (https://www.thingiverse.com/thing:4949488/files). 

bltouch cover right reverse mount

I have a small touchscreen and am using Marlin 2.x. The screen I have is not very responsive and found a stylus works pretty well (https://www.thingiverse.com/thing:4493887/filesl. I downloaded the stylus then made a mount that slides into the rail. 
For the stylus:
- 100% infill
- Brim on
- Supports 
- None- You may want to slow the print down a bit as it can wobble ner the end. 
- Some simple sanding post-processing worked well for me.  
For the clip:
- clip needs support but not a lot (I used tree supports) just around the clip part.
- I printed it vertically with a skirt and it worked fine. 

Screen stylus (remix)

I have a small touchscreen and am using Marlin 2.x. The screen I have is not very responsive and found a stylus works pretty well (https://www.thingiverse.com/thing:4493887/filesl. I downloaded the stylus then made a mount that slides into the rail. 

Stylus_clip.stl

remix of https://www.thingiverse.com/thing:4098773

This brought back a a lot of good memories when I stumbled across it. To me Assassin's Creed 2 was a game changer. I enjoy and appreciate the other he's in the franchise but this was very original in it's concept. Ezio is a great character!

- I cleaned up and solidified the base.
- Significantly reduced the polygon count as it was way too high.
- corrected bad meshes.
- 2 model sizes. (250mm for a great figurine and mini model hero scale size with proper base scale).

NOTE: I recommend this only for personal use based on my understanding of how the original was acquired. 



ezio-auditore-REMIX.3mf

remix of https://www.thingiverse.com/thing:4098773

- I cleaned up and solidified the base.
- Significantly reduced the polygon count as it was way too high.
- corrected bad meshes.
- increased height to 250 mm (you can print smaller if you want. 

NOTE: I recommend this only for personal use based on my understanding of how the original was acquired. 



Scaled to a hero size mini just for fun. sized base to correct dimensions for gaming (I think)

ezio-auditore-hero-REMIX.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

trey.wentz

Alternate AnkerMake M5C Filament Guide

AnkerMake M5C square build plate guides

bltouch cover right reverse mount

Screen stylus (remix)

ezio-auditore-REMIX.3mf