Fits tightly agains USB-B connectors and can be glued to the jack's surface to provide stress relief for the connector. Doesn't prevent the cable from being removed.

Print with the smaller side downwards. No supports needed.

USB-B Cable Support v1.stl

Alright, so you have your standard 19" rack and you want to install a screen there. However, you don't want to shell out 1200 € for a Black Magic Design screen since it's 4K and, while that's nice, is smaller than what's strictly necessary.

I work with live streaming of concerts and recently bought the [Thon BM AME/-ISO 5U](https://www.thomann.de/gb/thon_case_bm_ame_iso_5u.htm) case from Thomann and wanted to install my Iiyama screen in it. 

Here are the clamps for it.

So, things to note about this: 

1. These clamps are made for a screen with dimensions WxHxD 491x296x23 mm (your freedom units have no power here). 

Obviously, the height is irrelevant, but you'll need to adapt the model in case you want that flush horizontal security. Otherwise, you can use these clamps for any screen no more wide than stated and no thinner than 23 mm. If it's thicker, use longer screws and/or print spacers.

2. Print with a lot of perimeters. I used 5. This was originally printed on a Prusa i3 MK3S+ with PLA at the 0.3 mm DRAFT preset.

3. Print with the square surface towards your print plate for maximum stress tolerance.

4. the top corners are mirrored from the bottom ones, so you can just print two of each bottom side.

5. If you need help adjusting these for your screens, write me an email at rea.andrea.f at gmail etc.

Thon Case BM AME/-ISO 5U Display Mount

Alright, so you have your standard 19" rack and you want to install a screen there. However, you don't want to shell out 1200 € for a Black Magic Design screen since it's 4K and, while that's nice, is smaller than what's strictly necessary.

I work with live streaming of concerts and recently bought the [Thon BM AME/-ISO 5U](https://www.thomann.de/gb/thon_case_bm_ame_iso_5u.htm) case from Thomann and wanted to install my Iiyama screen in it. 

Here are the clamps for it.

So, things to note about this: 

1. These clamps are made for a screen with dimensions WxHxD 491x296x23 mm (your freedom units have no power here). 

Obviously, the height is irrelevant, but you'll need to adapt the model in case you want that flush horizontal security. Otherwise, you can use these clamps for any screen no more wide than stated and no thinner than 23 mm. If it's thicker, use longer screws and/or print spacers.

2. Print with a lot of perimeters. I used 5. This was originally printed on a Prusa i3 MK3S+ with PLA at the 0.3 mm DRAFT preset.

3. Print with the square surface towards your print plate for maximum stress tolerance.

4. the top corners are mirrored from the bottom ones, so you can just print two of each bottom side.

19" Rack Screen Mounts

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

rea.andrea.f

Achievements

Seedling

USB-B Cable Support v1.stl

Thon Case BM AME/-ISO 5U Display Mount