I designed this holder for Pens and Pencils, which can be mounted on the Wall, on any surface, using a Removable Double sided tape.

My favourite is to use this [Tesa Powerstrips Large](https://geni.us/htXx) for 2KG (which is a Non Residue, Removable Double Sided Tape).
Or the slimmer version [Tesa Powerstrips Small Pads](https://geni.us/TRDWdAm) for 1KG.
You can use also other Double sided tapes, but these ones I recommend, as they are very easy to remove, without leaving residue or tearing the paint.

Please ask me in the comments when you need more details.

\
[😎👉 See it in my video here](https://youtube.com/shorts/mUolUXCi8rk)
\
\
\
In this Listing I have Affiliate Links.
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)


Wall Pen Holder, with suspension spring

marsgizmo - Wall Pen Holder - Assembly View.step

I designed this Clip for Paper, which can be mounted on the Wall, on any surface, using a Removable Double sided tape.
I use this to mount my Designs on the wall and see all of them at once, especially iteration ideas.

I use this [Tesa Powerstrips Small Pads](https://geni.us/TRDWdAm) for 1KG (which is a Non Residue, Removable Double Sided Tape)
You can use also other Double sided tapes, but this is the one which I recommend, as it’s very easy to remove, without leaving residue or tearing the wall.
\
😉👉 Check attached Pictures for details.

Please ask me in the comments when you need more details.

\
(more detailed video coming)
\
\
\
In this Listing I have Affiliate Links.
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Adhesive Wall Clip for Paper

Marsgizmo - Adhesive Wall Clip for Paper - Assembly View - V1.step

I designed this Under Desk holder, for the Sandisk Pro DOCK Hub.
This is used for Professional video offloading and also as a Thunderbolt 4 Hub (with USB Ports, Gigabit Ethernet,..)

Items used:
- [SanDisk Pro DOCK Hub](https://geni.us/sandisk-pro-dock)
- [SanDisk Pro Multi Reader SD Card Mag](https://geni.us/sandisk-multi-reader)

Please ask me in the comments when you need more details.
You have both a version with Logo and one without the Logo.

\
(more detailed video coming)
\
\
\
In this Listing I have Affiliate Links.
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

SanDisk Pro DOCK - Under Desk Holder

Marsgizmo - SanDisk Pro DOCK - Under Desk Holder - Assembly View - V4.step

These are fully 3D Printed adapters, to make an Under Desk Drawer.

Items used:
- Linear Rails: [Blum Tandem Blumotion](https://geni.us/WvJ2jVh) BLUM Plus Extension 300 MM
- [Oak Wood Cutting](https://geni.us/umppL) Board - 25cm (width) / 35cm (depth)

Please ask me in the comments when you need more details.

\
You can see 😎 👉 [a Short Teaser Video here](https://www.youtube.com/shorts/dDhTBjZybQQ)
(more detailed video coming)
\
\
\
In this Listing I have Affiliate Links.
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Under Desk Drawer Adapter for Blum Drawer Rails

Marsgizmo - Under Desk - Blum Linear Rails Adapter for Drawer - V1 - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is a cover for the Cables on the back, of the [Blackmagic Atem Mini](https://geni.us/atem-mini) (my affiliate link), which is mounted onto Aluminium Profiles 3030 (T-Slot or V-slot), using [my mounting adapter](https://than.gs/m/917338).
For **mounting the Cover**, I created 2 Magnetic Mounts, which you stick on the Top Cabinet Surface, with double sided tape pads. 
Additionally you need **magnets**, you can use various sizes, I like using 8 x Round 15mm (diameter)x2mm(height) Neodymium Magnets, which I glue in place with a Hot Glue Gun. 
I want to make a better version for which you don’t have to use glue for the magnets. Let me know in the comments if that’s something you want and I can make it sooner.
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Audio / Video Filming Cart - Blackmagic Atem Mini Pro - Cables Magnetic Cover

Marsgizmo - Audio Video Filming Cart - Blackmagic Atem Mini Pro - Cables Magnetic Cover - V1 - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is an end cap with screw, for Aluminium Profiles 3030 (T-Slot or V-slot).
Typically 3030 Profiles have a center hole, which can easily be threaded for M8 screws.
For **mounting the End Caps** on the Aluminium Profiles, you need:
- for the 6.7mm End Cap, you need 1 x M8x15mm (or longer) Hex Counter Sunk Screw
- for the 38mm End Cap, you need 1 x M8x25mm (or longer) Hex Screw
- let me know in the comments if you need other dimensions

\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Aluminium Profile 3030 - End Cap with Screw

Marsgizmo - Aluminium Profile 3030 - Screw Cap - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is an adapter, for Mounting Microphone arms to Aluminium Profiles 3030 (T-Slot or V-slot).
This contains adapter, for different Mic arms:

- [Elgato Wave Mic Arm](https://geni.us/elgato-mic-arm) (my affiliate link)
- [Rode PSA1 Mic Arm](https://geni.us/rode-mic-arm) (my affiliate link)
- [Rode PSA1+ Mic Arm](https://geni.us/rode--psa1--plus) (my affiliate link)
- write me in the comments if you need adapters for other Mic Arms


For **mounting the base** on the Aluminium Profiles, you need 2 x M6x60mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)


Audio / Video Filming Cart - Mic Arm Adapter

Marsgizmo - Audio Video Filming Cart - Mic Arm Adapter - V2 - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is a Hand adapter, to easily grab and move the Filming Cart. It is attached Aluminium Profiles 3030 (T-Slot or V-slot).
For **mounting them** on the Aluminium Profiles, you need 2 x M6x60mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)


Audio / Video Filming Cart - Hand Holder

Marsgizmo - Audio Video Filming Cart - Hand Holder - V2 - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is an adapter, for Mounting the [Blackmagic Atem Mini](https://geni.us/atem-mini) (my affiliate link) to Aluminium Profiles 3030 (T-Slot or V-slot).
For **mounting them** on the Aluminium Profiles, you need 2 x M6x12mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
For the Atem Mini, you can also install my [Magnetic Back Cover for Hiding the Cables](https://than.gs/m/917352)
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Audio / Video Filming Cart - Blackmagic Atem Mini Pro Mounting Adapter

Marsgizmo - Audio Video Filming Cart - Blackmagic Atem Mini Pro Mounting Adapter - V2 - Assembly View.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, these are adapters, with holes **for 1/4 Threaded Inserts**, for mounting them to Aluminium Profiles 3030 (T-Slot or V-slot). Is for mounting different types of Camera Gear, into with 1/4 Threads (very common for Camera Gear).
For **mounting them** on the Aluminium Profiles, you need 2 x M6x60mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet.
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Audio / Video Filming Cart - Side Mount Extension for 1/4 Threaded Inserts

Marsgizmo - Audio Video Filming Cart - Side Mount Extension for 1-4 Threaded Inserts - Assembly View - V2.step

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is an adapter, for Holding the [Aputure T2C light](https://geni.us/aputure-t2c) (my affiliate link) to Aluminium Profiles 3030 (T-Slot or V-slot).
For **mounting them** on the Aluminium Profiles, you need 2 x M6x60mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)


Audio / Video Filming Cart - Aputure Amaran T2C Holder - V1

Marsgizmo - Audio Video Filming Cart - Aputure Amaran T2C Holder - Assembly View.step

Marsgizmo - Audio Video Filming Cart - Aputure Amaran T2C Holder - V1.stl

This is a Part of my **Ecosystem - Audio / Video Filming Cart**.
More specific, this one is an adapter, for mounting filming **C-Stand Tripod Pipes** (which have 35mm in Diameter) to Aluminium Profiles 3030 (T-Slot or V-slot).
For **mounting them** on the Aluminium Profiles, you need 2 x M6x60mm Hex Screws and 2 x M6 Profile Nuts for the Grove of your Aluminium Profile (typically 8mm groove).
\
You can see how I installed it in 😎 👉 [my Filming Cart Video here](https://youtu.be/xPMsxKW7MIE?t=134)
(more detailed video coming soon)
\
In this example, the entire System is mounted onto an IKEA Alex Cabinet. 
It can be mounted on any other cabinet (I recommend a heavy one, to have more stability)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Audio / Video Filming Cart - C-Stand Mount

Marsgizmo - Audio Video Filming Cart - C-Stand Mount - v2.0 - Assembly View.step

I designed this Magnetic Bit Holder.
Please let me know if you want me to make a video how to assemble it.

Required additional parts:
(with my affiliate links)

- [🧲 👉 magnets](https://geni.us/neodumium-magnet-15x2) It is using a wider range of sizes, with a height of 2mm. Recommended size is 15mm(diameter) x 2mm(height).
- [👀👉 Adhesive Pads](https://geni.us/adhesive-pads) for easier installation. I recommend any double sided tape pads (with a diameter of 5-15mm), to keep the magnets in place while installing.
- [⚙️👉 M3 Threaded Inserts](https://geni.us/threaded-inserts-cnc) You need 4 x M3 Threaded Inserts
- [🪛👉 Threaded Inserts Soldering Tips](https://geni.us/IAoU1B) For inserting the Threaded Inserts, using a Soldering Iron (please check details on the Threaded inserts for compatibility).
- [🔩👉 Hex Assortment Screws](https://geni.us/hex-asortment-screws) You need 4 x M3-8mm Hex Screw

\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Magnetic Bit Holder

Marsgizmo - Bit Holder - Assembly View.step

I designed this Universal Under Desk Holder, for almost any Laptop.

\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Universal Laptop Under Desk Holder

Marsgizmo - Laptop Under Desk Holder - Assembly View.step

Sand Can Holder, for Soda Cans, Beers, etc..
\
😎👉 see it in [my Youtube video here](https://www.youtube.com/shorts/q8JemK2EEFQ)

\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Sand Can Holder

Sand Can Holder - Assembly View.step

I Designed this Door Stopper, which has a Lid and you can add sand inside.
\
😉👉 you can check it in [my Youtube video here](https://www.youtube.com/shorts/lYnnG6vPlOQ)
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Door Stopper

Door Stopper - Assembly View.step

I designed this Camera Profile Slider, for 2020 Aluminium Profiles, T-Slot and V-Slot.
It is also using Threaded Inserts.
Please write me in the comments if you need more details 😊
\
Check the attached Pictures for details.

\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Camera Profile Slider for Aluminium T-Slot and V-Slot 2020

Aluminium Profile 2020 Slider - Assembly View.step

I designed this **Stylish Trash Can**, which I wanted to be narrow and compact, but still easy to use for longer bits of plastic (purge lines from 3D Printers, purge towers, etc.).
\
It's designed to **easily fit most hands inside**, if you want to clean it or even grab something from inside. 😉




\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)

Narrow Trash Can for Plastic - V2

I designed this stylish Trash Can, which I wanted to be narrow and compact, but still easy to use for longer bits of plastic (purge lines from 3D Printers, purge towers, etc.).

It's designed to easily fit most hands inside, if you want to clean it or even grab something from inside.

This was a cool project, which I explained here in my video: 
😎👉 https://youtu.be/-gGEP4eyf9w

..more details will follow here soon.

This design is protected by License
License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

Marsgizmo - Elgato Stream Deck and Wave XLR - under Desk Holder

__Marsgizmo Cable Management Loop __
It is designed for FDM 3D Printing.

> [Check them in my video here](https://youtu.be/pzlH20w0k6M)

For each size, there are 2 options, Normal and Vase Mode (which will have higher quality finish due to no seam).


[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
PETG Filament is recommended (PLA also works)
No supports

____________________________
\
\
\
License: CC BY-NC-ND 4.0 (Attribution-NonCommercial-NoDerivatives)
My Website 👉[marsgizmo.com](https://www.marsgizmo.com)

Marsgizmo Cable Management Loop

Marsgizmo Cable Management Loop - 50mm Vase Mode.stl

__This is a Cable Hook for Metal Pipes and Tripods__
It is designed for 3D Printing, for 35mm diameter Pipes.

[👉 You can check it in my video here](
https://youtu.be/zVkP6qhkY5E)


My website: https://www.marsgizmo.com)

[my Youtube channel] (https://www.marsgizmo.com)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
3 perimeters (walls)
Grid Infill (doesn't matter as it will be made only from perimeters)
PETG Filament (works also from PLA - like the ones in the video, but PETG is more reliable - use thicker version for PETG, because PETG is more flexible)
No supports
It's available in 2 versions, thinner and thicker.


____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)


Cable Hook for Metal Pipes and C-Stands

This is an example of how it looks on the metal pipes.

marsgizmo - Cable Hook - Example View - v1.iges

__This is a simple design of a Bracket for 16mm IKEA Shelves__
It is designed for 3D Printing.

> 👉 [check it here in my video](https://youtu.be/zYrTxvyfkZg)

[my Youtube channel](http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
5 perimeters (walls)
Grid Infill 50%
PLA or PETG Filament
No supports

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

Custom 16mm IKEA Shelf Bracket

Custom 16mm Shelf Bracket - Left.stl

__This is an under cabinet holder, for Alexa Echo Show 5__
It is designed for 3D Printing.

> 👉 [you can see the design process in my video](https://youtu.be/jqDYAlaZwCY)
> 👉 [and also how I installed this video](https://youtu.be/GgxiOfYM0O8)

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
[Designed for this Echo Show](https://amzn.to/30KxFU5)
(my affiliate link)
____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
It should be printed on the side (check the video).
3 perimeters (walls)
Grid Infill 15%
PLA or PETG Filament
Enable supports only from angle above 80 degrees.
Weight 90 grams
Time 7.5 hours / per item (Prusa MK3S)

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

Amazon Echo Show 5 - under cabinet holder

__This is an under cabinet holder, for Alexa Echo Show 5__
It is designed for 3D Printing.

> 👉 [you can see the design process in my video](https://youtu.be/jqDYAlaZwCY)
> 👉 [and also how I installed this video](https://youtu.be/GgxiOfYM0O8)

[my Youtube channel] (https://www.marsgizmo.com)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
3 perimeters (walls)
Grid Infill 15%
PLA or PETG Filament
Enable supports only from angle above 80 degrees.
Weight 90 grams
Time 7.5 hours / per item (Prusa MK3S)

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

__This is the new version V3, of Marsgizmo Filament Bunker__

This is a solution to keep your 3D Printing Filaments dry.
It is designed for 3D Printing.

Please ignore the wrong part names (currently not possible to rename them). 
After download, you'll get the correct parts and names.


This new version is compatible with both containers (Narrow and Wide).

__Check the added pictures for more details__


See the quick assembly in [my video](https://youtu.be/Es-HM-d71WA)
Here's also the [previous video] (https://youtu.be/w2T6HxC_8cE)

____________________________

__What do you need to make it?__

For each individual Filament Bunker, you need (more details below):
> 1 x cereal container
> 4 x bearings
> 1 x about 50cm (20”) of PTFE tube
> 1 x PTFE connector (for 4mm OD PTFE tube)
> 50 grams (1/2 cup) of Silica beads
>  1 x Hygrometer
> 3D Printed Parts (1 x Main Body, 1 x Silica Lid, 1 x Cylinder 1 and 1 x Cylinder 2). No supports needed for printing.


____________________________

__Where to buy the additional parts?__
The following are my affiliate links.

There are 2 cereal containers (Narrow and Wide), check the above video to distinguish the differences:
> Narrow Container: with big handgrips can hold Spools of 60mm width and 200mm in diameter (usually 750g Spools) 
Get them from here (not available in all countries): [link] (https://geni.us/pSLAo)


> Wide Container: can hold Spools of 68mm width and 200mm in diamerter (usually 1Kg Spools, e.g. Prusament, etc.).
Get them from here (not available in all countries): [link] ( https://geni.us/nrcXpYG)


The volume of both containers is 4 liters (16.9 Cups, 135.3oz).
DO NOT GET the smaller versions!


Using regular 608 ZZ (or 2RS) skateboard bearings: 
> pack of 10: [link] (https://geni.us/uLMvbQ)
> or pack of 100: [link] (https://geni.us/OiChoH)



PTFE tube and connectors. I recommend 3mm ID / 4mm OD, but you can also use regular 2mm ID / 4mm OD
(ID - Inner Diameter, OD - Outer Diameter)
> 3mm ID / 4mm OD: [link] (https://geni.us/NIfXBG4)
> 2mm ID / 4mm OD: [link] (https://geni.us/4YjDen)
> PTFE M10 Connector: [link](https://geni.us/JQRSNXl)

Silica Beads: 
> the best are Molecular Sieve beads [link] (https://amzn.to/3jljvU9)
More details about [which method is the best](https://www.sorbentsystems.com/desiccants_charts.html)
> silica beads with no markers: [link] (https://geni.us/ktHdsU)
I recommend using silica with no color markers, the ones which are blue or orange are [slightly toxic](https://en.wikipedia.org/wiki/Silica_gel)

Hygrometer (the square version, not round): [link] (https://geni.us/gAhF3)
Dimensions: 46mm x 27mm / 1.81 x 1.06 inch.



____________________________
__Printing details:__

> - no supports needed!
> - can easily be printed from PLA (try to use quality PLA), otherwise go with PETG.
> - 0.2mm layer height for better quality, but also 0.3mm layer height works fine (lower quality)
> - 3 perimeters (for strength)
> - 100% infill (there’s a very tiny difference in overall quantity)
> - you need in Total around 67 grams on PLA, for one complete set.
> - you can print is on small beds like Prusa Mini 18x18cm (you only need to rotate the Main Body 45 degrees)
____________________________

__Check my other videos:__

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)



____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

marsgizmo Filament Bunker V3

__ This is the Main Body for the marsgizmo Filament Bunker__
It is designed for 3D Printing.

> 👉 [check it here in my video]()

[my Youtube channel] (https://www.marsgizmo.com)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__


____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)


Main Body v5.stl

Marsgizmo Filament Bunker v3 - Cylinder 2.stl

__This is a C-stand Caster Wheels Adapter__
It is designed for 3D Printing.

> 👉 [check it here in my video](https://youtu.be/Hl4Q6FbPrps)

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__Materials used:__
(my affiliate links)
[C Stands used](https://amzn.to/3iTmWxo)
[Caster Wheels](https://amzn.to/3lGn9FX)
[PETG Filament](https://amzn.to/3cKOjsD)
[Screws box](https://amzn.to/3cxUqjx)
For each adapter, you need: 4 pieces of M4x8mm(or 10mm) and 1 piece of M3 x16mm.
____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
7 perimeters (walls)
Grid Infill 50%
PETG Filament
No supports
Weight 110 grams / per item
Time 8 hours / per item (Prusa MK3S)

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

C-stand Caster Wheels Adapter

[I'm an inline-style link](https://www.google.com/)

C-stand Caster Wheels Adapter v1.stl

__Desk Cable Hook Organizer__
It is designed for 3D Printing

> 👉 [check it here in my video](https://youtu.be/RlARKNuDEsA)

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
3-5 perimeters (walls)
Grid Infill 50%
PETG Filament
No supports
Weight 20-30 grams / per item

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

Desk Cable Hook

Desk Cable Hook Organizer
This is designed for 3D Printing.

You how I've made it in my video: https://youtu.be/RlARKNuDEsA


Desk Cable Hook.stl

__This is a Celebration Award, for reaching 100K Subscribers on Youtube__
It is designed for 3D Printing.

> 👉 [check it here in my video](https://www.youtube.com/watch?v=Q8THhUXANpQ)

[my Youtube channel] (http://youtube.com/marsgizmo)
[my Instagram channel](https://www.instagram.com/marsgizmo)

____________________________
__3D Print Settings:__
> 0.2mm layer height (0.4mm nozzle)
No supports
Use Color Change Feature from PrusaSlicer or Plugin from Cura (see details in the video)

____________________________
License Type = CC BY-NC-SA 
(CC Attribution-NonCommercial-ShareAlike)
[marsgizmo](https://www.marsgizmo.com)

Youtube 100K Award

This is a Celebration Award, for reaching 100K Subscribers on Youtube.

You can check how I 3D Printed it in my video: https://www.youtube.com/watch?v=Q8THhUXANpQ

You can 3D Print it, from PLA and use the Filament exchange feature (from Prusaslicer or Cura Plugins) to change the filament at different heights, to highlight the text.

See also my other videos: http://youtube.com/marsgizmo

____________________
This is Licensed under Creative Commons, License Type = CC BY-NC-SA (marsgizmo.com)

Attribution-NonCommercial-ShareAlike
More details here: https://creativecommons.org/licenses/by-nc-sa/4.0/legalcode


Youtube 100K Award.stl

Sand Can Holder - Hook - v2.stl

Sand Can Holder - Cup Holder - v2.stl

Marsgizmo - Bit Holder - Magnet Holder - Bottom V2.stl

Marsgizmo - Bit Holder - Top - V2.stl

Join an amazing group and let’s **travel together**, through the Cosmos of 3D Printing 🚀
😉👉 Use my code: **marsgizmo** for 50% OFF your first month (while I finish setting up everything)

From Lunar beginnings to Galaxy Master, **I am here to help you through your journey**

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

marsgizmo

Pinned models

Narrow Trash Can for Plastic - V2

Sand Can Holder

Magnetic Bit Holder

Wall Pen Holder, with suspension spring

Adhesive Wall Clip for Paper

SanDisk Pro DOCK - Under Desk Holder

Under Desk Drawer Adapter for Blum Drawer Rails

Audio / Video Filming Cart - Blackmagic Atem Mini Pro - Cables Magnetic Cover

Aluminium Profile 3030 - End Cap with Screw

Audio / Video Filming Cart - Mic Arm Adapter

Audio / Video Filming Cart - Hand Holder

Audio / Video Filming Cart - Blackmagic Atem Mini Pro Mounting Adapter

Audio / Video Filming Cart - Side Mount Extension for 1/4 Threaded Inserts

Audio / Video Filming Cart - Aputure Amaran T2C Holder - V1

Audio / Video Filming Cart - C-Stand Mount

Magnetic Bit Holder

Universal Laptop Under Desk Holder

Sand Can Holder

Door Stopper

Camera Profile Slider for Aluminium T-Slot and V-Slot 2020

Narrow Trash Can for Plastic - V2

Marsgizmo - Elgato Stream Deck and Wave XLR - under Desk Holder

Marsgizmo Cable Management Loop

Cable Hook for Metal Pipes and C-Stands

Custom 16mm IKEA Shelf Bracket

Amazon Echo Show 5 - under cabinet holder

marsgizmo Filament Bunker V3

C-stand Caster Wheels Adapter

Desk Cable Hook

Youtube 100K Award