tracking pixel
gazzaladra

Planter “Glitch”

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
Image 1 of 6
Planter “Glitch” 3d model
2D
3D
Makes
instagram-play
Planter “Glitch” 3d model
Planter “Glitch” 3d model
Planter “Glitch” 3d model
Planter “Glitch” 3d model
Planter “Glitch” 3d model
Planter “Glitch” 3d model
This model is restricted by licensing terms. 
27 Likes48 DownloadsSeptember 27, 2023
This model is restricted by licensing terms. 


A Planter inspired by old video games. It is a low poly, slightly crooked design to commemorate how things looked like in the early days. While oddly shaped the planter is very functional and fast to print with a lifted drainage for happy little plants.

Scaling / size

  • Upscaling (100% +): as big as you want
  • Regular size (100%): 131 x 136 x 132 mm – has a wall thickness of 2 mm
  • Smaller (80%): 105 x 109 x 105 mm – has a wall thickness of 1.6 mm
  • Minimum size (60%): 79 x 81 x 79 mm – has a wall thickness of 1.2 mm

Due to its non-symmetrical shape the plater only fits the saucer in one specific rotation. There is a small mark on the planter and saucer for easy alignment.

Print settings Required build volume: 140 x 140 x 130 mm Material usage: 150 g Print time: 9 h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none

Watertight printing: If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), increase print temperature, check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.


27 Likes48 DownloadsSeptember 27, 2023




This model is restricted by licensing terms. 
27 Likes48 DownloadsSeptember 27, 2023
This model is restricted by licensing terms.