tracking pixel
F

E3D V6 Mount Geeetech A10 A10M A20 A20M

by

firepower

Follow
Follow
Remix Model
Like
F
firepower
Image 1 of 21
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
2D
3D
Makes
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
E3D V6 Mount Geeetech A10 A10M A20 A20M 3d model
This model is restricted by licensing terms. 
0 Likes4 DownloadsSeptember 27, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4240378.

E3D V6 Mount A10 A10M A20 A20M

Designed to mount on the existing A10 X carriage, use two M5x30mm SS Hex head screws for more support / key instead of original dome head screws for top roller bearings, for quick removal and replacement fixed with M3 screws the same as cage was mounted. (bottom roller bearing screw stays the same)

Includes a version with mount for A10 hotend PCB to be mounted above and facing front for easy cable access. PCB can be mounted in front or behind the PCB mount.

Can be used with 1 or 2, 4010 blower part cooling fans and matching fan duct. If only using 1 part cooling fan you can mount the fixed mount probe (FMP) 12mm there instead of 2nd fan by using "mount probe" to get probe closer to the hotend. Printing Fan Duct at 45 degree angle works best.

With 2 part cooling fans the probe 12mm is mounted outside of the part cooling fan using "mount probe fan". Fans or probe can be mounted left or right as it suits your build.

Fans and Probe mounts using M2 screws. Fan top 8mm, Fan Bottom 12mm , Fan Probe 16mm. I bought a box set of M2 screws of 30 x 4,6,8,10,12,16mm

Due to M5 Hex Cap Head bolts being sold with 2 sizes of head 8.6mm (knurled) and 8.0mm (smooth) diameter, I also added both type so now 4 versions of back plate with choice of with PCB mount or not, and choice of M5 8.6mm or 8.0 mm hex head. Added label showing M2 and 8.0 or 8.6 on back plate.

Recommend printing in high temp filaments, I used PETG

Updated: Add BLTouch mount for comment request. "A10M_V6 Mount BLTouch Fan M2" and "A10M_V6 Mount BLTouch M2", can also be mounted right or left side.

Updated: Added 10mm coupler for direct drive. Joins E3D Titan extruder to E3D V6 heatsink.

Updated: Added Volcano Nozzle Parts Fan Duct

Purge Bucket for this E3D V6 Hotend Mount https://www.thingiverse.com/thing:4459509

Prometheus 3 in 1 Filament Switcher https://www.thingiverse.com/thing:4459555


0 Likes4 DownloadsSeptember 27, 2022




This model is restricted by licensing terms. 
0 Likes4 DownloadsSeptember 27, 2022
This model is restricted by licensing terms.