tracking pixel
printableconcrete

Masking plate for the Simple round rope organizer hook

by

printableconcrete

Follow
Follow
Remix Model
Like
Masking plate for the Simple round rope organizer hook 3d model
2D
3D
Makes
Be the first to upload a make
0 Likes1 DownloadsAugust 4, 2021


UPDATED DESIGN by https://www.printableconcrete.com/ : Use the masking ring to easily glue the hook and form a beautiful joint. The rope organizer hook secures your coils of rope in your cockpit. Use 3mm thick bungee cord to hold the coils up and secure to the hook. The knot is neatly hidden from sight in the dedicated knot chamber. The foot provides a large area to glue the hook to a flat section of your cockpit wall. No drilling is needed, so there is no risk of leaks. Secure the masking tool to the cockpit surface using masking tape. Use a thick layer of sika or other similar glue between the back side of the hook and the cockpit surface. At the end of life cycle just cut the glue layer with an exacto knife and remove the glue residues. A yellowish mark on the gel coat might be visible after removal, but that will whiten out with time and UV exposure.

Dive into the details of 3D printed floating homes, investigate the economics of 3D printing, and learn how 3D concrete technology functions. Expand your knowledge with additional readings. Begin your journey into construction's future here.


0 Likes1 DownloadsAugust 4, 2021




0 Likes1 DownloadsAugust 4, 2021