tracking pixel
Scott M

Christmas Icicle Ornaments (2)

by

dazus k

Follow
Follow
Remix Model
Like
dazus k
dazus k
Image 1 of 3
Christmas Icicle Ornaments (2) 3d model
2D
3D
Makes
Christmas Icicle Ornaments (2) 3d model
Christmas Icicle Ornaments (2) 3d model
Christmas Icicle Ornaments (2) 3d model
This model is restricted by licensing terms. 
18 Likes50 DownloadsNovember 13, 2021
This model is restricted by licensing terms. 


These fun ornaments are surprisingly easy to print (if you use the versions with built-in supports).

Not for commercial use. Please see license agreement.

No rafts or other supports are needed. The built-in supports keep the ornament perfectly rigid while printing and release effortlessly once printing is done and leave no marks on the print. Infill is recommended for the lattice version only (to cleanly print the geometry). The spiral version requires no infill.

Given the shapes and the thin walls (recommend 0.4mm thick), they seem to glow even when printed with opaque filament. The first photo shows them printed in Sunlu Transparent. The others were printed with opaque TTYT3D Cyan. They would let in even more light with transparent filaments.

The spiral version with supports took about 4.5 hours to print. The lattice has more complex geometry and takes about 5.5 hours without infill and 6.5 with infill.


18 Likes50 DownloadsNovember 13, 2021





This model is restricted by licensing terms. 
18 Likes50 DownloadsNovember 13, 2021
This model is restricted by licensing terms.