Upload for Search
Search By Text
Upload for Search
Search By Text
Scott M

Christmas Icicle Ornament

by

dazus

Follow
Follow
Like
Christmas Icicle Ornament by dazus full viewable 3d model
Loading preview...
7 Likes21 DownloadsNovember 13, 2021

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

7 Likes21 DownloadsNovember 13, 2021

Community Uploads

No photos added yet, be the first to upload a photo!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4994543. This may look impossible to print, but I've made it very easy by including a version with built-in supports. I've printed this with both 0.4mm and 0.8mm walls. Both printed really well and resulted in an extremely light ornament. Pictured above is the 0.4mm version printed in Sunlu Clear PLA at 0.1mm layer thickness. Printing took about 4 hours. With the version that has the supports built-in, you need no other supports, no raft, no brim, and no infill. You can scale the print up or down as much as you like. At 100%, the final ornament is about 150mm high and 25mm wide. The real challenge with printing it smaller is the star-shaped loop at the top. If you print too hot or you don't have sufficient cooling, then the loop will melt as it prints. I print at 185 C.




7 Likes21 DownloadsNovember 13, 2021

This model is restricted by licensing terms. 

Community Uploads

No photos added yet, be the first to upload a photo!

This model is restricted by licensing terms. 

7 Likes21 DownloadsNovember 13, 2021

Community Uploads

No photos added yet, be the first to upload a photo!