Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4787070.
If you find this thing useful, please consider leaving a tip. Thanks! https://paypal.me/cdsmakestuff
Easy to print / build shelf for filament rolls.
Use inexpensive 8" x 10" pressed steel shelf brackets (see photos for sticker on bracket) and 3/4" electrical "emt" conduit. Conduit can be cut via pipe cutter, hacksaw, dremel or your local home center may cut to length you need. Conduit is captured in printed saddles, no glue or other affixing is needed.
Requires 3 screws (use whatever size fits well) and 1 zip tie per bracket to attach printed parts. Recommend to screw brackets into wall studs. Should carry the load of spools on every other stud (32" apart if standard 16" on center studs).
An 8 foot span should be able to hold 35-40 "standard" spools.
Will print without supports, although a little cleanup with a knife will be needed on the underside of the front (outer) part around the screw hole.
Like and comment or if you have any questions.