#ThangsBambuContest

**Description**

Designed a modular aux fan based off my other dual aux fan model that can either be a second aux fan or bentobox. A second aux fan is helpful when printing PLA, in a non-enclosed environment  for additional cooling. The bentobox is used when the P1P is fully enclosed and printing higher temp filaments that emit harmful odors. The bentobox re-circulates and cleans the air as it passes through a carbon and HEPA filter. Why modular? To keep the spirit of the P1P! Being able to have the best of both worlds no matter what filament or environment is being used. 

**Please see PDF file in downloads for instructions.**

Bambu Lab P1P Modular Dual Aux Fan / Bentobox

Assembly 2.stl

#ThangsBambuContest

**Description**

Designed a second aux fan for double the cooling power!

**Please see PDF file in downloads for instructions.**

Bambu Lab P1P Dual Aux Fan

Assembly.stl

#ThangsBambuContest

**Description**
 
I created a printable cable chain for the p1p as I realize not everyone has access to the cable chain from Amazon that I linked in my other design https://thangs.com/designer/brody.bolanos/3d-model/Bambu%20Lab%20P1P%20Cable%20Drag%20Chain%20Assembly%20-%202%2F8%20Updated-810174?manualModelView=true . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. 

- Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.
- When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.
- Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. 
- In the pictures you can see the difference in sagging with the chains fully extended.

**Please see PDF file in downloads for instructions.**

Bambu Lab P1P Printable Cable Drag Chain

p1pframe-1 assembly v81.stl

#ThangsBambuContest

**Description**

Designed a few parts needed to attach a cable chain, similar to the one seen on the X1. The chain helps keep the USB cable and PTFE tube completely inside the P1P, which is needed if you're going to use a covered top like the glass lid on the X1, also just like the way it looks. 

 

**Please see PDF file in downloads for instructions.**

Bambu Lab P1P Cable Drag Chain Assembly

p1pframe-1 assembly v80.stl

#ThangsBambuContest

**Description**
- Relocated and modified the printable LED mounting bracket from Bambu Labs. Please read description below. 

**Please see PDF file in downloads for instructions.**. 

Bambu Lab P1P Modified LED Mount 2.0

Assembly v1.stl

Hello! My profession is in IT sales but my passion is solving problems and creating! 3D designs, printing, programming
, smart devices , IoT, smart homes, furniture design, woodworking, and carpentry. I currently use the Autodesk suite, mainly Fusion360 and Inventor.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow