This is mounting parts for the Bullseye fan duct for the Elegoo Neptune 2 using a Sherpa Mini direct drive extruder and a Phaetus Dragonfly. The mount is based on Badger_Fish's mount found here: https://www.thingiverse.com/thing:4823923

You can probably use it with other hotends but the positioning of the filament path is based on the modified positioning the Dragonfly requires (the heat block is meaty).

The mounting point holes on the top and side should be filled with some m3 threaded inserts. Added by using a soldering iron or hot knife to melt them in place.

The hotend fan can be mounted with a couple of self-tapping screws.

Elegoo Neptune 2 - Fan, Hotend & DD Mount

Mount for the bullseye fanduct. http://www.dpetsel.com/bullseye.html 

Elegoo Neptune 2 - Direct Drive Sherpa Bullseye.stl

This is a remix of MinionD's fan duct available here: https://www.thingiverse.com/thing:4819097

It is modified to position the filament path for my Sherpa Extruder mount https://thangs.com/bostintech/Elegoo-Neptune-2--Direct-Drive-Sherpa-Extruder-Mod-19459 and has a little extra reinforcement on the sides.

Best printed in ABS/PETG

Elegoo Neptune 2 - Direct Drive Sherpa Fan Duct.stl

This is a remix of MinionD's fan duct available here: https://www.thingiverse.com/thing:4819097

It is modified to position the filament path for my Sherpa Extruder mount and has a little extra reinforcement on the sides.

Best printed in ABS/PETG

This is my mod for using the Sherpa Mini extruder on an Elegoo Neptune 2. Not too complex, just a shelf that bolts to the carriage and the extruder. 

Recommend you print 100% infill so it's nice and strong. Probably best in ABS, PETG or other more heat tolerant material.

Elegoo Neptune 2 - Direct Drive Sherpa Extruder Mod

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like