tracking pixel
Zack F

Anycubic Vyper Super Tray (Super Spiffy)

by

ZackFreedman

Follow
Follow
Remix Model
Like
Anycubic Vyper Super Tray (Super Spiffy) 3d model
2D
3D
Makes
Be the first to upload a make
103 Likes358 DownloadsJune 14, 2021


The Anycubic Vyper has a magnetic storage tray in its base... and mine had backwards magnets. Instead of prying them out, I redesigned the tray from scratch and added some spiffy Voidstar flair.

This tray replaces the stock version and perfectly fits every accessory included with the Vyper with room for spares.

The stock tray's flimsy foam holds the adorably tiny flush cutters, wrenches, two included nozzles, cleaning pin, and hex key set.

This version adds slots for the SD card reader, three SD card, nine nozzles in three sizes, and the scraper spatula. The tools are easier to use, too - the hex keys get individual recesses, and the cleaning pin is out of the test tube and into a magnetic tray with protective pocket. It still fits all the other supplies, and it looks goooood.

Print with a brim and supports on build plate only. The bottom is tilted upwards - lay it flat to print faster with less material, but compromise the appearance.

Glue in three 6x2mm magnets - one in the cleaning pin tray and two on the back. Take care to orient the back magnets so they attract the magnets in the base!

This is licensed Creative Commons 4.0 NC-BY. Download the original Fusion 360 file at https://a360.co/3gikQJg.

6x2mm magnets (with 298 spares): https://amzn.to/3gju73H


103 Likes358 DownloadsJune 14, 2021




103 Likes358 DownloadsJune 14, 2021