Upload for Search
Search By Text
Upload for Search
Search By Text
Jacob P

Stomp Rocket (Flexible Plunger)

by

ThinAir3D

Follow
Follow
Like
Stomp Rocket (Flexible Plunger) by ThinAir3D full viewable 3d model
Loading preview...
11 Likes41 DownloadsMarch 6, 2022


Community Uploads

No photos added yet, be the first to upload a photo!


11 Likes41 DownloadsMarch 6, 2022

Community Uploads

No photos added yet, be the first to upload a photo!

This model is printed in 4 pieces and the Plunger is designed to work with flexible filaments. There are 4 files to print: the Plunger, Base, and Nozzle, and Rocket. The Plunger HAS to be printed in flexible filament (I used Flexible PLA by Ataraxia Arts), and I would recommend printing the rocket in flexible as well so it doesn't break or cause damage. **Printing, Assembly & Post Processing** **FDM or Resin:** FDM **Scaling:** Scalilng up should be fine, scaling down may affect the threads for the nozzle. **Supports:** No supports **Nozzle Size I Used:** 0.4 **Infill/Perimeters:** 3 Perimeters on the Plunger! For the other pieces, I used 2 perimeters and 10% infill. **Layer Height:** I used 0.2 layer height. Would probably be fine to use a high layer height (except plunger). 2/11/2022: Initial Upload - To test this model I used Ataraxia Flexible PLA on both the Plunger (necessary) and the Rocket (help it not break but not NECESSARY) - I designed the plunger to be printed with 3 walls on a 0.4 nozzle (the walls are 1.2 mm thick so if you use a 0.6 nozzle you can use 2 walls) - At the time of writing this, I am redesigining our own rocket but for now you need to download the rocket from the provided link above on thingiverse! 2/23/2022: Rocket Uploaded - I have designed uploaded my own rocket for the design so its no longer necessary to use the one from Thingiverse. - My rocket design has a sharper pointed tip so it should fly a little bit better. **This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially. If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D
CategoryHome & Garden




11 Likes41 DownloadsMarch 6, 2022


Community Uploads

No photos added yet, be the first to upload a photo!


11 Likes41 DownloadsMarch 6, 2022

Community Uploads

No photos added yet, be the first to upload a photo!