The bi-directional bolt allows clockwise and counterclockwise nuts to spin the opposite direction to tighten and loosen. 

IMPORTANT, the bi-directional nut does not work well with the bi-directional bolt and catches often.

If you want to print the double ended bolt, make sure to print the nuts first and then pause the print to put the nuts on.

Bi-Directional Bolt & Nut

Bi-Directional Bolt.stl

This Easter egg has a twist, literally. It is 2 parts that twist together to give it a cool look and open & close mechanism. Candy or what ever can be put inside.

Twist Close Egg

DISPLAY ONLY.stl

It is 20*20*20 mm with the lid on. the internal dimensions are 16.8 cubed.

XYZ Cube Box

XYZ Box.stl

Rounded XYZ Cube

XYZ Cube

Depending on the way the shape is viewed, it can look like 3 completely different shapes. There is a plate that the shape can fit through 3 different ways.

Tri-Squircle

Tri-Squircle.stl

Designed to test the flow rate of 3D printers. All the walls are 0.8 mm wide.

0.8 mm Flow Test

This was designed to mount to a Vex plate and snuggly Hold the Dragon Touch Vision 3 action camera. 

Dragon Touch Vision 3 Camera Mount for Vex

It is made for one of the first versions of Vex, so it would only work for the people who still has the V.5 Vex. The antenna holder for the V.5 receiver kept breaking the wire, so I designed one so that the antenna doesn't have to bend sharply.

Note, this is made for V.5, not V5.

Antenna Mount for Vex V.5 Receiver

The antenna holder for the V.5 receiver kept breaking the wire, so I designed one so that the antenna doesn't have to bend sharply.

Designed to attach to a vex axel to use Lego Track with Vex.

Lego Track Sprocket for Vex

Lego Track Sprocket for Vex Axels

Pinwheel Cookie Cutters

Pinwheel Cookie Cutter 2.stl

Change the filament when it gets to the next layer of the shield to get a cool effect.

Captain America Charm

Change filament when it gets to the next layer of the shield to get a cool effect.

Shield Charm.stl

Remix of Simple Heart Box with Lid by 3dprintbunny and of Heart Box Container with Lid by RayneMan [https://www.thingiverse.com/thing:2492743](url)

Valentines Heart Box (Remix)

Base.stl

Lid.stl

DISPLAY_ONLY.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5803845.

Use thicker rubber bands otherwise it might fall off.

Slingshot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5801745.

It does not have any wheels, so you'll have to find your own. It uses a piece of filament for the axle.

1/64 Cybertruck Body (No Wheels)

This is a remix of Chicken by My3DPrintForge, https://www.thingiverse.com/thing:4670423

Hairy chicken (Remix)

This is for the hairify anything contest using the hairify blender add-on. This is a remix of Chicken by My3DPrintForge, https://www.thingiverse.com/thing:4670423

Hairify chicken

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5765562.

This can be used for a good Halloween decoration, or just a fall decoration printing the pumpkin with no face.

Jack-O-Lantern

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5761859.

This is a 20*20*20 mm dice, but it can also be used for 3D printer accuracy tests.

Dice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5752091.

This lithophane Box holds 4 120*120 mm lithophanes.

Lithophane Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5750077.

This holds 3.5*2.5 in. playing cards and it snaps together so it doesn't open accidentally. It is still easy to open when you need the cards. 

Playing Card Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5749666.

This is a 250*250*400 mm container. I designed it to hold filament scraps, but it could really hold anything you want.

Large Container & Lid

Large Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4701209.

This is switch labels that screw into the screws on the switch plate. You may need to get some longer screws to screw it in.

Switch Lables

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4970181.

This design has 4 different coasters with a holder for them. The coasters have a diameter of 100mm and has a lip around the edge to hold any spilled liquid. There is a hexagon coaster, a circle coaster, a square coaster, and a triangle coaster.

Coasters

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4701229.

This is a straw holder to hold the straw on spray cans. It just slides over the can and there is three different sizes.

Can Straw Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4969991.

This a hidden drawer for the 40×40mm aluminum rails. There is 2 designs, one for what ever you want to put in it and another for 12 nozzles. This was designed for the Ender 3 V2 But will fit other printers.

Hidden Drawer in Aluminum Rails

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4701134.

This is a mini test cube for quick printing that tests 5 different printing capabilities.
- Width Test: 2mm, 1.5mm, 1mm, 0.75mm, 0.5mm, 0.25mm, 0.15mm, 0.05mm
- Accuracy Test: 20 x 20 x 20mm cube
- Overhang Test: 35°, 45°, 55°, 65°
- Bridging Test
- String Test

To download this model, find it on Cults3D
https://cults3d.com/en/3d-model/tool/mini-test-cube

Mini Test Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4970215.

This is a 5 piece puzzle cube that is 2.25×2.25in or 57.15×57.15mm. None of the pieces are the same and I have not found any other solutions.

Puzzle Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4970195.

This Container has 2 different sizes, 50×50mm and 30×30mm. The lid should be a good fit and you might need to sand down the lip on the 30×30mm container.

Cube Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4835656.

This is a 2 piece planter with an optional lid for grass. The base fills with water so you do not have to give the plant water as often. The top has the dirt and plant with holes in the bottom large enough for water to get in but small enough that dirt won't fall out.

Planter with Reservoir 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4970246.

This is a sphere dice that use a ball bearing and has a hexahedron shape hollowed out in the inside to have the bearing land on on of the 6 corners. It prints in 2 parts so you have to glue the 2 parts together with a bearing inside.

Sphere Dice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4701252.

This is a 2 part soap dish with an angled bottom that angels to a drain hole so the water could drain.

Draining Soap Dish

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4566493.

This is a quarter scale replica of the Artillery Sidewinder X1.

1/4 Scale Artillery Sidewinder X1

Artillery Sidewinder X1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4970137.

This is a Shelf to display 1:64 die-cast cars. It mounts with 2 screws and is angled 22.5 degrees to see the cars better. The shelf can display 8 cars and can display a car length of 9 cm.

1/64 Scale Die-cast Car Shelf

1:64 Scale Die-cast Car Shelf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

The3DPrintingMaster