tracking pixel
Stephen S

GotWay MSuper X Fender Mudguard MSX (Includes Variants)

by

SuperSport1966

Follow
Follow
Remix Model
Like
GotWay MSuper X Fender Mudguard MSX (Includes Variants) 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
0 Likes6 DownloadsOctober 23, 2021
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3230717.

What is this for? https://youtu.be/PyuSpqig23M

<font color=red><b>EDIT: Just added a stretched version of the fender to hopefully help with clearance. I have not been able to test this model, so try at your own risk.</b></font>

Finally getting around to posting my MSuper X fender (Mudguard). This is a remix from EUCGUY's fender for the MSuper V3. I had to modify the design and make new lower clips, but the upper clips I used directly from his design because they work so well.

When you install, compress it from the sides at the lower clips. Tuck the upper clips into place, then the lower clips. The fender must be slid all the way up against the upper clips so that the lower clips will click into place above the LED housings.

IMPORTANT: After you've gotten it to click into place above the LED housings, be sure to press outwards on the fender to be sure the lower clips are as far outward as possible. This will make sure the tire does not rub. If your tire is rubbing, then check that the fender is all the way up and out.

NOTICE: If you would like the Parking Stand version of this fender, please see here: https://www.thingiverse.com/thing:3230675


0 Likes6 DownloadsOctober 23, 2021




This model is restricted by licensing terms. 
0 Likes6 DownloadsOctober 23, 2021
This model is restricted by licensing terms.