Sparks3D.it

Mono Vase

by
Sparks3D.it
Follow
Follow
Remix Model
Sparks3D.it
Sparks3D.it
|
Image 2 of 2
Mono Vase 3d model
Sparks3D.it
Sparks3D.it
|
Image 2 of 2
Mono Vase 3d model
2D
3D
Makes
Mono Vase 3d model
Mono Vase 3d model
This model is restricted by licensing terms. 

The Mono vase features a modern and elegant design with an elliptical structure, soft lines at the ends that contrast with a series of vertical ribs decorating the perimeter, adding a distinctive look and tactile texture.

For the 3D printing of this vase, the use of a 0.4 mm nozzle is recommended with layer heights of 0.1 mm for fine details or 0.2 mm for a faster print. A 15% infill in rectilinear mode is suggested for a balance between strength and material use. The shell should have three bottom layers and five top layers to ensure that the top of the vase is well sealed. For the walls, three to four layers are recommended to ensure that the vase is waterproof.

The vase has three drainage holes at the bottom to prevent water stagnation, which are essential for plant health. Included in the design is also a saucer, which serves to collect excess water and to protect the surfaces on which the vase will be placed.

The model is designed to be scalable, thus allowing users to adapt it to their specific needs and available spaces. It is possible to resize the vase in the slicer before printing, according to the desired dimensions or the printing times one wants to employ.


22 Likes32 DownloadsMarch 4, 2024


22 Likes32 DownloadsMarch 4, 2024
This model is restricted by licensing terms.