**A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. ** Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for better printability.
Please note: the body of the reindeer should be supported.
Happy printing!
**3D printing settings **Size: 5,3 x 2,9 x 10 cm (can be scaled to your liking) Layer height: 0.2 mm Perimeters: 2-3 Infill: 10% Print time: 2,5 hours Print speed: 30mm/s (slow but steady) Bed adhesion: I recommend using adhesive, otherwise a brim, for better bed adhesion. None could work, but it is a bit tricky. Supports: Yes (touching buildplate) Top contact Z-distance supports: 0.25 - 0.35mm Orientation: upright (standing on its legs)