2x2x1 - Simple Walls - Universal Click-In Multibin Shell Extension

Use Universal Click-In Multibin Extensions to extend the height of Multibin Shells.

The Bottom Rim clicks into place and can be further secured using Pins. Keep in mind, the Bottom Rim takes up space inside of the Bin.

Universal Click-In:

“Universal” Multibin Extensions have gaps on the Bottom Rim that allow you to click it on to more than one Multibin Shell. However they only have 4 pin holes and aren’t as strong as Standard Click-In Extensions (which have more pin holes).

Simple Walls:

• Use “Simple Walls” Extensions if you want to extend “Simple Wall Multibin Shells”.

You can also place Bin Bottoms inside of Click-In Multibin Extensions to give them a base.

Multipoint Dimensions:

This Bin Extension is 2x2x1 cells (98 mm long, 98 mm wide and 55 mm high). Stacking a 1 cell high Extension on a Multibin Shell will increase its height by 50 mm.

The internal distance between walls is 94x94 mm (although the bottom click rim will make it 88x88 mm). The internal height is 49 mm.

Simple Dimensions:

This Bin Extension is 2x2x1 cells (98 mm long, 98 mm wide and 55 mm high). Stacking a 1 cell high Extension on a Multibin Shell will increase its height by 50 mm.

The internal distance between walls is 94x94 mm (although the bottom click rim will make it 88x88 mm). The internal height is 49 mm.

Learn more about Bin Extensions at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io