Ultra articulated starfish in two sizes - three variants - with or without magnets

Now you can get the most articulated Starfish ever!!!

There are two size versions, one which fits to a 200mm bed and the big ones which needs 265mm bed size and three variants for the center part.

The arms are made of 11 parts in the small version and 26in the huge version (shown on the render picture).

The center part is available in three variants, a sphere, with a star in the middle and a 5 sided pyramid.

Additional there are models which have a hole with 6,5 mm diameter and 3mm depth in the arms tip that you can glue some magnet in. The magnet hole in the center part is D19x5,5 that you can use it as a really cool fridge magnet!

I added two test files that you can check before if your printer settings will work before printing the complete model.

The design is made for support free printing! I used 2 walls and 20% infill.

If you like the model or the idea, I would be happy if you like it or download it. Stay tuned for my other models.

Would be happy to see your makes!

For the arms i used magnets with D6x2,5 and glued them in.

The magnet in the center part could be e.g. this one D18x5.

https://www.amazon.de/Meisterwerk-Magnete-fu%CC%88r-Magnettafel-stark/dp/B0C56WMJ5L/ref=sr_1_8?adgrpid=167782147104&dib=eyJ2IjoiMSJ9.HVf-1WIN1u-KIJyxiXD7VXscvzujZ9q9xJg8Kghi2-XXDkE5X2iERCmcgife0DwhOWRrUy91Z7lTnoQ6ByHdh7ipFLhDG7OzdduAWyG4CD3UzIFv-DrvHJB8g_E6RPaxWYAmb4_7UDujvLfbq9W5365HmiHjXPhr04Jr-Ug7ws0lamLWUMDPjtugv2x6yy4RuQIlXh9LSDJ1uJKMP-zaoszSGqHIHXuo0NGe_pF4quuXcReMqLfUO3kwd_XPKzlMn3IDNaq2kgThzuvJJZ0whUTDFKYT723aP-na59d50xs.IZp9_7gEo-zB-Xa17bAW61VtLvg_LJB_zxu017yyGXc&dib_tag=se&gad_source=1&hvadid=696379395753&hvdev=c&hvexpln=71&hvlocphy=9115502&hvnetw=g&hvocijid=17458209175081326158--&hvqmt=b&hvrand=17458209175081326158&hvtargid=kwd-300059214880&hydadcr=27933_2279270&keywords=magnete+von+amazon&qid=1728851533&sr=8-8

I was inspired by this model https://makerworld.com/models/785432 , recreated it from zero and optimized the design. I not used his models for remixing, i created the models by my own! But for his work in advance my attribution goes also to SesameMakes. https://makerworld.com/@SesameMakes Despite his great work, I had to invest a lot of time and make many test prints, but the result is great.