Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4752800.

Wanted a better looking stand for my Berkey than the block of wood I had it on, and I wanted it higher off the counter surface than the 6' the factory stand offers.

I have provided 2 sized stands with options.

One is for the Royal at 9-1/2" diameter, and the other is for the Big, at 8-1/2" in diameter, both sized so that about 1/2" of Top shows around the rubber base ring.

A few different models can be assembled using Bases with or without Feet, with or without Rings, using a shorter Upper: just some options for the desired overall height/appearance.

A Foot is 20mm tall; a Base-No Foot is 130mm tall; a Base-Foot is 110mm tall; a Ring is 10mm tall; an Upper is 130mm tall; a Shorter Upper is 120mm tall; the Top is 5mm thick at contact area.

I made one for my Royal and another for a UK friend who has a Big.

Mine is Base-No Foot, Ring, Upper, and Top: the height from counter to the Top of the stand is 10-5/8", and to the bottom of the spigot is 10-7/8"

The Big is smaller in diameter, has Feet, and is just as tall.

You'll need 1 of each desired piece and 3 Top section pieces.

The Part name indicates if it is for the Big or the Royal model.