#summer
Over the summer, I had this project to build a charging station out of wood. However, after I saw this contest come up, I decided to design and 3D print one. This charging station is built to fit a 7-port USB power adapter (I will post the link in the comment section). This power adapter is designed to fit under this charging station. To close the big hole under where the devices are charging, I designed a frame that would cover it (This is hard to describe in words, I will provide a visual representation image). I would like to print the frame and this main part separate colors since it will be very visually appealing. In addition to making it look nice, there is a circle design on the charging walls so that the inner frame will be visible. On the back, there is a hole where all of the wires will go. Lastly, the other big hole is a drawer for charging blocks. This gives space for some charging blocks but also gives the whole station more stability so it doesn't lean over. The item can be 3D printed with ease, and NO SUPPORTS are needed (just change the orientation if needed on the slicer if needed). It can also be printed on the ender 3. I am going to print my model with PLA at .2 mm with 10% infill. The other parts of this station will also be posted :) Thanks PDO and thangs for providing these awesome challenges